Operating Instructions

Table Of Contents

LG400 – Operating Instructions

-49-

Then fix this setting using the screw (a).

Change the height of the grip by undoing the clamping screw (b). Ensure here that

the screw (b) is flush with the flat surface of the grip.

Set the three-dimensional inclination and rotation out of the middle plane of the

grip using the ball-and-socket joint which is fixed by the screw (c). To alter the

setting, undo the screw (c), set the required position of the grip and lock it in this

position by retightening the screw.

Tip: Avoid displacing the grip too far to the side, in order to minimize faults when

the trigger is pulled.

• Optimum grip ergonomics

• 3D-settable

• Interchangeable grip sizes

• Left-hand and right-hand versions

LG400 Alutec BASIC

The basic grip adjustment has the

same possibilities as the expert

grip adjustment, with the

exception of the 3D ball-and-

socket adjustment. To adjust the

grip longitudinally and laterally,

loosen the clamping screw (a). To

adjust the height, loosen the

screw (b).