Installation Instructions

LP500 MATCH AIR PISTOL

Proven Walther technology with an adjustable electronic trigger:

The e-trigger guarantees exact trigger settings for several hundred thousand

shots. Thus the LP500-E is the ideal rifle for demanding sport shooters. The

LED charge-level indicator and the built-in rechargeable battery ensure that

the rifle is ready to fire and can be charged quickly. The e-trigger is virtually

wear-free, giving you consistent performance whatever the conditions.

And for those who prefer a classic mechanical trigger:

We have continued to tighten our production tolerances and perfect our mechanical trigger system.

The results can be clearly felt. The geometry, design, damping and wear

have all been scrutinized to give you the best possible solution.

1 REMOVING THE TRIGGER

Both types of trigger are removed in the same way. Follow these steps:

1. Make sure that there is no projectile in the barrel.

2. The LP500 must be uncocked to remove the trigger. Point the pistol in a safe direction and pull the

trigger. The e-trigger should be pulled several times.

3. Undo the grip fastening screw (1) and pull off the grip.

4. Undo the two mounting screws (2) and remove the trigger system.

Before performing any adjustment, assembly, maintenance or cleaning, always

make sure that the rifle is decocked and that the barrel is free of projectiles and

obstructions.

CAUTION

IMPORTANT

PLEASE REFER TO THE LP500 OWNER’S MANUAL FOR ADDITIONAL INFORMATION.