Instruction Manual

ENGLISH

4.3 Fig. 3

4.3 Extractor

4.3.1 Remove Extractor

WARNING: While you remove the extractor, be sure

to control the striker safety and the extractor plunger

so that they do not fly out.

Place the slide upside down with the muzzle facing to the

left. Push in the extractor plunger with a 2 mm punch

(4.3 Fig. 1). Cover the striker safety and the extractor plunger

with a finger while you pivot the extractor out. Remove the

striker safety assembly and the extractor plunger assembly

from the slide.

4.3.2 Install Extractor

Place the slide upside down with the muzzle facing to the left.

Insert the striker safety assembly and the extractor plunger

assembly into the slide (4.3 Fig.2). Align the rear end of the

extractor to the extractor slot and press it towards the slide

with the thumb of your other hand. Push down the extractor

plunger with the 2 mm punch and press in the extractor until

they hold each other without pressing in the extractor

completely in. Remove the 2 mm punch, while the eyelet of

the extractor holds down the extractor plunger (4.3 Fig. 3).

Hold the safety plunger down flush with the surface of the

slide. Press in the extractor completely until the plunger

snaps into the hole of the extractor (4.3 Fig. 4).

4.4 Magazine

WARNING: Wear safety glasses when

disassembling or assembling the magazine.

4.4.1 Disassembly

WARNING: The magazine spring is under pressure. Use

caution when stripping down the magazine. Control the

floorplate catch and the magazine spring while you

remove the floorplate so that they do not fly out and

cause injury.

1. Using a 4 mm punch, depress the floorplate catch through

the hole in the floorplate (4.4 Fig. 1).

2. Slide the floorplate forward off of the magazine tube while

continuing to depress the floorplate catch in the tube.

3. Remove the floorplate catch and spring carefully from the

magazine tube through the bottom of the tube.

4. Turn the tube right side up and remove the follower through the bottom of the tube.

4.4 Fig. 1

4.3 Fig. 1

4.3 Fig. 2

4.3 Fig. 4