Installation Manual

Window
Frames
#15
Frosted Glass #21 -
for Drive-thru Service
11.50 MM
18 MM
Before After
Qty: 4
Qty: 2
4) NOTE: This step is optional. To change
the look of the kit, and add a Drive-Thru /
Pick-Up window, remove the shaded areas
from the parts indicated. Use care, as the
parts are fragile. We recommend you
measure and scribe the dimentions on
Frosted Glass (21) first. Drill out the
corners with a #60 Drill Bit, then cut out the
remaining portion with a sharp knife blade.
5) Build up each Wall (Wall, Window Frame, Door and
Glass) with the parts illustrated to create assemblies.
Do not glue completed assemblies to each other - a
specific order will be required. Asterisks indicate
Modified Parts (if you chose to do so in Step 4).
8
15
21
20
17
6
*These are the parts that
would need to be modified in
the optional step #4
*
*
4
15
*
19
18
13
13
14
2
19
15
*
3
5
16
20
21
*
15
*
7