User Manual

Treble: Works in the same way as the bass and mids knob, but controls
the amount of treble on the eected signal. Again, fully counterclock-
wise the treble is reduced considerably and clockwise brings it
forward.
Bass Boost Switch: This switch oers an added level of control over
the lower frequencies of the pedal by allowing you to kick in a niece
low end “thump”. Great for fattening up single coils, making small
cabinets sound big, or getting the most from the higher tone knob
setting.
Bright Boost Switch: Opposite of the bass boost switch is the bright
boost switch. This switch will allow you to add higher frequencies
“brighten up” otherwise seemingly dark pickups or amps.
Post gain knob: this knob saturates the circuit with a lovely warm
overdrive designed to give you those famous powerfull tones that you
love.
Pre gain knob: this knob will allow you to dial in that famous
“mid-range” overdrive boost to hit the front end of the main gain
channel. (Note – 3 band EQ will not eect the boost channel)
Post Gain switch: This bypass switch is used to engage the main
Plexi-drive gain stage of the pedal. We use a true-bypass relay because
it utilizes a quieter and smoother switch that is more reliable than
traditional bypass switches. Your original tone/signal will remain
unaected when the pedal is not engaged.
Pre gain switch: This bypass switch will allow you to engage that
famous “mid-range” overdrive boost to hit the front end of the main
gain channel. We use a true-bypass relay because it utilizes a quieter
and smoother switch that is more reliable than traditional bypass
switches. Your original tone/signal will remain unaected when the
pedal is not engaged.
WARNING:
Inside this pedal are three gold colored trim pots. These are set at time of production to bias
the jfet gain stages . If you move these there is every chance your pedal will sound absolutely
awful!
Power Requirements
The pedal can be powered by a 9V battery. The battery terminal is located inside the pedal. If
using a power supply, power needed for the pedal is 9V DC, regulated, center pin negative, as
supplied by most standard Boss™/Ibanez™/Etc. supplies. The pedal can be safely powered with a
multi-supply, like the Visual Sound 1SPOT™. The pedal was designed explicitly around the usage
of a 9V DC power source, and is intended to sound its best at 9V. To avoid damage to the pedal,
do not exceed 18V DC, do not use center pin positive adapters, and do not use AC power. Using
an incorrect power adapter can lead to damage and will void the warranty on the pedal. This
pedal draws 22mA.
Please note: If you are using a battery, it will drain when the input cord is plugged in.
Return and Warranty Policy
For direct sales, there is a 14-day “no questions asked” period where you may return the pedal for any reason, provided that it is in its original condition. Please retain
all packaging within this period in case you decide to return it! We only require that you pay shipping back. The 14 days start when you receive the pedal. This does
not apply to dealer or retailer sales – see their individual return policies for specic information.
All Wampler Pedals, Inc. pedals carry a 5-year, fully transferable warranty that covers defects due to parts and labor. The warranty begins at the point of purchase.
Please remember to register your pedal as soon as possible after purchase at the following web page to ensure quicker service if you should ever need to make a
warranty claim: www.wamplerpedals.com/warranty_registration
For warranty repairs or questions, please feel free to contact us at www.wamplerpedals.com/contact_us.html
Cleanish, bitey and unpredictable. The harder you play, the
more it bites back...
Hey Joe...
Pretty little thing let me light your candle now, ‘cause momma
this tone is hard to handle...
Hard to Handle?
For those about to rock...
This tone should be attempted if when you close your eyes,
you have 100,000 people shouting “Angus!” at you...
Modern Country
This might just be the most Urban tone of them all...
Suggested Settings (volume to suit)
Any trademarks attributed that are not owned by Wampler Pedals, Inc. are for
demonstrative purposes only, and are property of their respective owners