Owner manual

Fuzz – As you can probably guess, this controls the amount of fuzz
that is heard. The more you turn it clockwise, the fuzzier the sound will
become. As usual the amount of fuzz achieved and the style of the
fuzz diers depending on where the switch is. This is explained fully
below.
Brightness This adjusts between a much darker, bassier sound at the
fully counterclockwise position, to a very highs-forward, present
sound fully clockwise. As with most tonal adjustments, you're proba-
bly going to nd the right t for your gear somewhere between the
extremes. It's not a bad idea to start at noon and adjust in small
increments from there to let your ears get used to the sound of the
pedal as you raise or lower the Brightness knob. You will nd that this
knob reacts dierently depending on the voicing option, again - play
with it on each setting and see which one is best for you
Big / Tight – The beauty of this pedal is the options you get from this
switch. With the switch in the up position, you will get a bigger sound
that has a fat but creamy fuzz quality to it but cleans up with the
guitar's volume control just as good (if not better) than those vintage
2 knob fuzz pedals.The volume pot on the guitar can really change the
dynamics in this position.
In the down position, the tone is tighter and feels a bit more distortion
like – yet a creamy fuzz tone that is bordering on the edge between
distortion and fuzz. Again, its really worth taking the time to hear the
dierence in ipping between these two and nding which of the
tones will work best for you.
IMPORTANT.
Placing the pedal after a buer may make it react AND sound dierent
from design. It is best placed outside or before any buering.
Power Requirements
The pedal can be powered by a 9V battery. The battery terminal is located inside the pedal. If
using a power supply, power needed for the pedal is 9V DC, regulated, center pin negative, as
supplied by most standard Boss™/Ibanez™/Etc. supplies. The pedal can be safely powered with a
multi-supply, like the Visual Sound 1SPOT™. The pedal was designed explicitly around the usage
of a 9V DC power source, and is intended to sound its best at 9V. To avoid damage to the pedal,
do not exceed 9V DC, do not use center pin positive adapters, and do not use AC power. Using an
incorrect power adapter can lead to damage and will void the warranty on the pedal. This pedal
draws 23mA.
Please note: If you are using a battery, it will drain when the input cord is plugged in.
Return and Warranty Policy
For direct sales, there is a 14-day “no questions asked” period where you may return the pedal for any reason, provided that it is in its original condition. Please retain
all packaging within this period in case you decide to return it! We only require that you pay shipping back. The 14 days start when you receive the pedal. This does
not apply to dealer or retailer sales – see their individual return policies for specic information.
All Wampler Pedals, Inc. pedals carry a 5-year, fully transferable warranty that covers defects due to parts and labor. The warranty begins at the point of purchase.
Please remember to register your pedal as soon as possible after purchase at the following web page to ensure quicker service if you should ever need to make a
warranty claim: www.wamplerpedals.com/warranty_registration
For warranty repairs or questions, please feel free to contact us at www.wamplerpedals.com/contact_us.html
A singing fuzz with gallons of sustain, pushed through a
cooking amp for classic fuzzy lead tones.
Numb but comfortable
Clis of Johnson
Some say it’s violin like, others say it’s just the sweetest fuzz
tone ever... We’ll let you decide.
Are you experienced?
This lady sure is foxy.
Jacks white stripes.
If you going to recruit an army, best recruit from all seven
nations.
Suggested Settings
Any trademarks attributed that are not owned by Wampler Pedals, Inc. are for
demonstrative purposes only, and are property of their respective owners