Operating Instructions and Installation Instructions

26
Target value for the volume of the space to be heated:
Not all spaces meet the present insulating values. According to DIN 18893, the following values can be taken for
the volume of the space to be heated:
If heating circumstances are favourable: Calculate according to DIN 4701
In less favourable circumstances: 120 m3
In unfavourable circumstances: 82 m3
For temporary heating you may assume a reduction of 25% for the volume to be heated if the interval is more
than 8 hours.
Table for insulation material.
Please note! Only use products given in the grey-shaded part.
Insulation Packed Thermal conduction Maximum Density
appl. temp.
no Article no Form no packed no ºC no Kg/m3
10 Mineralwool 01 Bands  01 Stitchedmats 10 100 02 20
11 Glass wool 02 Loose wool Stitched mats 12 120 03 30
12 Rock wool 03 Wool 02 Stitched mats 14 140 04 40
13 Waste products Granule G. curve 2 16 160 05 50
04 Felt 06 60
05 Lamella mat 10 Flakes 07 70
G. curve 1 08 80
06 Stitched into 11 Flakes 09 90
mats
07 Plates G. curve 2 10 100
08 Scales 72 720 11 110
09 Segments 20 Plates 74 740 12 120
10 Interwoven G. curve 1 76 760 13 130
21 Plates
G. curve 2 18 180
99 Otherwise 99 Single 99 99
▲ Select the insulation material from this table. PLEASE NOTE: Group 99 is NOT ALLOWED.