User's Manual

22
The life expectancy of the Battery Pack is approximately 300 recharges.
Store the Battery Pack in cool and dry place, the ideal temperature is from 10 to
30. The Battery Pack will discharge quickly in hot environment and the life of the
Battery Pack will be shortened.
DO NOT throw the Notebook PC in municipal waste. Check local regulations for
disposal of electronic products.
DO NOT put the Battery Pack near or in the fire, or else it may cause fire or
explode.
The Battery Pack will short circuit if the Battery Pack puncture or reassemble.
8-2 Power Management Modes
8-2-1 Standby mode of the System
The function of Standby mode: Store your current data and status in RAM, turn off the
external device, but the Power Indicator Light still turns on. If you press the POWER
button, the system will operate again.
8-2-2 Hibernate
In “Hibernate” mode: The current data and status are stored on HDD and the
Notebook PC turns off (the Power Indicator Light will turn off). Press the POWER
button to restarting the system.
Activate the “Hibernate” function: Click the left button of the mouse on the
“Hibernate” label of thePower Options Propertieswindows, select the “Enable
Hibernate”, then “System Hibernate” will display inPower Options Properties
windows.
8-2-3 Log Off
Click the left button of the mouse on “Start” click the left button of the mouse on
“Turn Off Computer” select “Standby” or “Hibernate” Enter the standby mode or the
hibernate mode.
If the system is force to turn off because of using up the power in the standby mode.
Your current data and status will be stored on the HDD. The system will operate again
after changing a power-full battery or connecting the wall outlets.
When the power is used up, the Notebook PC will exit the standby mode and turn off.
Store your working data, before using up the power of the Battery Pack.
8-2-4 Restart the System
Press POWER button to exit the suspend mode and enter the current status. And
the “restart” function will reactivate all the operating programs.