User's Manual

 DO NOT leave the Battery Pack discharged over three month, the Battery Pack will

be damaged, it must continue to be charge every three months, as well as the

spare Battery Pack.

 Purchase an additional Battery Pack.

 DO NOT often plug or pull the Adapter from the electric outlets, it is the best way to

prolong the Battery Pack’s life.

 The life expectancy of the Battery Pack is approximately 300 recharges.

 Store the Battery Pack in cool and dry place, the ideal temperature is from 10℃ to

30℃. The Battery Pack will discharge quickly in hot environment and the life of the

Battery Pack will be shortened.

 DO NOT throw the Notebook PC in municipal waste. Check local regulations for

disposal of electronic products.

 DO NOT put the Battery Pack near or in the fire, or else it may cause fire or

explode.

 The Battery Pack will short circuit if the Battery Pack puncture or reassemble.

9-2 Power Management Modes

9-2-1 Standby mode of the System

The function of Standby mode: Store your current data and status in RAM, turn off the

external device, but the Power Indicator Light still turns on. If you press the POWER

button, the system will operate again.

9-2-2 Hibernate

In “Hibernate” mode: The current data and status are stored on HDD and the

Notebook PC turns off (the Power Indicator Light will turn off). Press the POWER

button to restarting the system.

Activate the “Hibernate” function: Click the left button of the mouse on the

“Hibernate” label of the“Power Options Properties”windows, select the “Enable

Hibernate”, then “System Hibernate” will display in“Power Options Properties”

windows.

9-2-3 Log Off

Click the left button of the mouse on “Start” → click the left button of the mouse on

“Turn Off Computer” → select “Standby” or “Hibernate” → Enter the standby mode or the

hibernate mode.

If the system is force to turn off because of using up the power in the standby mode.

Your current data and status will be stored on the HDD. The system will operate again

after changing a power-full battery or connecting the wall outlets.