Directions Meanings of icons: Forbidding: forbid improper operations to avoid damaging the Notebook PC. Caution: cautions for operators to avoid potential damages. Please note and remember. Importance: important information, common notes, definitions, general knowledge and references, etc. Other trademarks and trade name may be used in this manual to refer to either the entities claiming the marks and names or their products.
Content Directions ..............................................................................................................................1 Safety Precautions ...............................................................................................................3 Notice for the USA FCC Part 15 .........................................................................................4 1 Knowing Your Notebook PC ....................................................................................
Safety Precautions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. DO NOT press or touch the LCD Screen. DO NOT place the Notebook PC with small items, they may scratch LCD Screen or enter the Notebook PC. DO NOT expose the Notebook PC to dirty or dusty environment. Keep the environment clean and dry. DO NOT place the Notebook PC on uneven or unstable work surface. DO NOT place or drop objects on the top of the Notebook PC. DO NOT shove any foreign objects into the Notebook PC.
Notice for the USA FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. However, there is no guarantee that interference will not occur in a particular installation.
WARNING: To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.
1 Knowing Your Notebook PC 1-1 Top Side 1. Microphone 2. Built-in Camera 7. Light is green when the cap keypad Click Fn+F1 to turn on or off the 3. 4. 5. is unlocked. camera function. 8. LCD Screen 9. WiFi Indicator Power button Power Indicator 10. Keyboard HDD Status Indicator 11. Right-key Light is green when the HDD is in 12. One key-locking button active mode. 6. Cap Lock Indicator Click to turn on or off the touchpad. Numeric Keypad Indicator 13.
1-2 Right Side 1. SD/MMC/MS Port 3-in-1 card reader 2. USB Port (2.0) 3. HDMI Port 4. Lock Port 5. Ethernet/LAN Port 1-3 Left Side 1. Power Jack 2. VGA Port 3. USB Port (2.0) 4. Microphone Jack 5. Headphone Jack The USB card can only be inserted in one orientation. Force to insert the card may in result of damage. 1-4 Bottom Side 1. Lithium Rechargeable Battery 2. Battery Latch 3. Speakers 4.
2 Caring the Notebook PC The Notebook PC is a precision device; the error operation may damage the device. 2-1 LCD Screen LCD Screen is the most delicate component of the Notebook PC and comprised of thin glass. It may be broken up by external abrupt force. DO NOT scratch the cover of the Notebook PC, or the scrape on the cover cannot remove. DO NOT cover the LCD Screen strongly, or else damage may occur.
2-3 Keyboard Keyboard is the most often used component by finger directly. Use a little brush to clean or a can of compressed air to remove dust from between the keys on the keyboard. Moisten a soft, lint-free cloth with water or cleaner and wipe the surface of the keys smoothly. If the water seeps into the keyboard, the circuit will not be damaged directly because of the no-power supply keyboard. But the deteriorate of the Printed circuit board will occur and will result in malfunction of the keyboard.
2-7 Other Notes DO NOT expose the Notebook PC in hot environment for a long time, especially in the car. Or the parts of the Notebook PC will be metamorphic. Keep the data for future possible use termly. Renew the hardware or software termly in order to keep the Notebook PC compatible and steady. 3 Traveling with the Notebook PC Turn off the Notebook PC and disconnect all lines before moving it. Following the below steps, if you want to travel with your Notebook PC. Attention 1.
4 Getting Started 4-1 Install the Rechargeable Battery Power the Notebook PC before using it. There are two ways to power the Notebook PC: Use the AC Adapter to power it or use the removable Battery Pack. The Notebook PC is designed to work with a removable Battery Pack. Your Notebook PC may or may not have its Battery Pack installed.
4-3 Connecting the Power Adapter The Notebook PC comes with a universal AC-DC adapter and the allowable input voltage of adapter is from 100V to 240V. Following the below steps to connect the adapter: 1. Take the adapter and the power cord, and then connect the adapter with the power cord. 2. Plug the DC end of adapter into the power jack of the Notebook PC. 3. Insert the AC end to the wall outlet 4. Check the connections above correctly before turning on the Notebook PC.
5 Using Your Notebook PC 5-1 Turning on the Notebook PC 1. Open the LCD screen and adjust the angle of the Notebook PC’s LCD Screen 2. Press the POWER button to turn on the Notebook PC. The state after powered off the unit varies with the advance setting of the PC. You can set up the settings as following: Click “Control Panel”→“Power Options”→“Choose what the power button does”;after setting, click “Save changes” to save the setting and exit.
Function Keys These function keys with the color word or icon sign means that their function only can be activated when clicking the function key and the key at the same time. +：Turn on or turn off the camera window. +：Turn on or turn off the WiFi. +：Turn on or turn off the mute. +：Turn down the volume. +：Turn up the volume. +：Shift between LCD Screen and external monitor. +：Decrease brightness of LCD Screen.
5-6 Display Property Settings The Notebook supplies the VGA/HDMI port for connecting External Monitor or TV. (The following is the description while connecting TV display) 5-6-1 Connecting the HDMI-equipped TV Connect one end of the HDMI cable to the HDMI port of the unit, the other end to the HDMI port of the TV, as shown below: Before connecting, switch the digital TV screen display to be HDMI mode.
Display Settings Select “Display Settings” to enter the menu as right: On the menu, you can set the “Color Quality”, “Screen Resolution”, “Refresh Rate” “Rotate” of the display screen. Color Correction Select “Color Correction” to enter the menu as right: On the menu, you can correct the screen color through adjusting the “Color”, “Gamma”, “Brightness” and “Contrast”.
Hot Keys It’s to enable or disable for the hotkeys. Tray Icon Select to enable or disable for the tray icon. Select “Enable” and the icon would display at the right-bottom corner of the desktop. You also can do the above operation via clicking the icon . Rotation Select the desired rotate angle to view. The operation as above may be different under the different operation system that you need to operate according to your actual machine.
6 Upgrading Your Notebook PC 6-1 Connect the External Monitor The Notebook PC supplies a VGA port for connecting External Monitor or projective device. 6-1-1 How to connect the External Monitor 1. Turn off the Notebook PC and insert the 15-pin D-sub monitor plug to the external monitor. 2. Turn on the Notebook PC. +：Shift between LCD Screen and external monitor. 6-1-2 Connect Keyboard and Mouse The Notebook PC’s integrated the keyboard with 87 keys.
6-1-4 Lock Port The Lock Port allows the Notebook PC to be secured using and can prevent the Notebook PC to be removed from a fixed object. 6-2 Enter the BIOS Setup Menu Follow the below steps to enter the BIOS Setup Menu: 1. Click F2 button quickly during loading the system, then the system will enter “Setup Utility” as shown below: 2.
Click F9 button to setup defaults and select “Yes” to confirm. 4. There is no need to change the startup order and click F12 directly to select the temporary startup option after turning on the unit. The BIOS version would be updated occasionally. Once there is difference from the manual, please be subjected to the actual operation.
7 Appendix 7-1 Troubleshooting Q1：How to turn off the Notebook PC when the halted system cannot warm boot? A：Press the POWER button and hold 4 or 6 seconds to turn off the Notebook PC. Q2：How to check the Notebook PC if the Notebook PC cannot be turned off? A：1.If the power is low, connect to the electric outlets. 2.Check that the video display system is not in the external monitor mode. 3.Make sure the indicator of the adapter turns on and the adapter works well. 4.
Q7: If the image isn’t clear A: Check that the lens is clear or not, if not, clean with the soft cloth. Q8: If the mobile moves slowly A: The camera needs some light when gathering the data and the speed will be slow if the light condition isn’t good. Please adjust the screen position of the Notebook PC or the position of the user. The image display also shall be slower by the heavy loading for the system when the many applications are running. Please close the unused procedure.
7-2 Specifications Main Feature CPU Intel pentium SU4100 CPU Power Consumption 10W MAX On-die, primary 32-kB instructions cache and L1 Cache Size 32-kB, write-back data cache L2 Cache Size 2MB on-die second level cache Memory (#) 2GB Max Memory Type DDRII 800MHz Storage HDD Capacities (#) 250GB TFT Screen TFT Screen Size 13.3” Screen Type TFT Description 1280 X800 Built-in Camera Resolution 1.
Sound Card Type HD Codec I/O Device Mouse Touch Pad Keyboard 87-key keyboard Condition Operating Temperature 5-35℃ Operating Humidity 35%-85% Storage Temperature -20-55℃ Storage Humidity 20%-93% Power Adapter AC 100~240V; DC 19V Output Power (maximum) ≤65W Battery (Type) Lithium rechargeable battery Voltage 11.1V Port Standard LAN Type: 10/100Base-T LAN Wireless Card: 802.11 b/g/n Headphone Port, Speaker, Built-in Microphone, Audio Port Microphone Port USB Port USB-A Port(x3)，USB2.
HDMI Port HDMI1.2 Output Physical Features No battery About 1.4Kg With battery About 1.8Kg Weight Dimension 327*230*35mm Design and specifications are subject to change without notice. The # symbol means that the item is optional.
