User's Manual

Quanzhou Wanneton Electronic&Technology Co.,Ltd
Baijie International Centre ,Qiaonan District, Chidian Town, Quanzhou, China
an extended period and to avoid radio damage due to overheating.
* Automatic Power
Save Feature
Your radio has a unique circuit designed to dramatically extend the life of the battery. If you
do not transmit and do not receive an incoming call，or no button and knob operation
within 3 seconds, your radio switches to the Power Save mode. The radio is still able to
receive transmissions in this mode.
Low battery alarm
When the battery is low, it can be charged in time by voice reminder.
When the battery is too low, the transmission will be prohibited.
Scan
The Scan feature allows you to listen to activities on a channel, keeping track of your team
members. With this feature enabled, the radio searches the scan list preset for the current
channel and stays on a channel with activities.
Selected intercom channel 16, after opening the scan, the terminal will scan according to
the scan list, the channel scanning when there is an event; will stay on the channel to listen
to understand the current status of activities related members.
Busy Channel
Lockout
The Busy Channel Lockout feature allows the radio to keep beeping when you press and
hold [PTT] key when the current channel is occupied by other radios. When the current
channel is idle, you can transmit by pressing and holding [PTT] key.
Adjust the power
level
Select Power Level, and then select one of the following as required:
High Power: Enables communication with distant radios but consumes more battery power.
Low Power: Enables communication with close radios and saves battery power.
Monitor Feature
The Monitor feature allows the radio to receive weak signals.
Channel broadcast
Used to prompt the sequence of the current channel.
*Voice Operated
Transmit（VOX）
The Voice Operated Transmit (VOX) feature allows you to transmit voice without pressing
and holding the [PTT] key. The radio automatically transmits voice when the volume
reaches the preset level. A higher gain level indicates lower sensitivity, which requires
higher volume for triggering transmission.
You can set the sensitivity of the microphone voice emitted by voice gain. The higher the
voice-activated gain level, the lower the sensitivity and the louder the volume of voice
required for the terminal to transmit. Please set the gain level correctly according to the
current environment and the volume of the speech, etc., so as to avoid frequent accidental
triggering of voice control (high sensitivity) or difficulty in triggering voice control (low
sensitivity).
General：
Frequency range FRS 462.5500 - 462.7250 MHz （RX/TX）
Memory channels 16 Groups
Operation voltage DC3.7V
Frequency stability ±2.5ppm
Operation temperature -20℃~+50℃
Mode of operation Simplex
Antenna impedance 50Ω