Wanscam IPCAM User Manual Wireless/Wired Network IP Camera Night Vision & Remote Operation User Manual 1
Wanscam IPCAM User Manual Thank you for buying our IP camera. Wanscam AJ Series IP Camera products are designed and equipped for local and remote network video surveillance system, including wired IP bullet camera, wireless IP bullet camera, IP IR dome camera, IP IR waterproof camera, IP Pan/Tilt/Zoom Camera etc. We adopt high performance chip to ensure high quality media processor which processes audio and video collection, compression and transmission.
Wanscam IPCAM User Manual Table of CONTENTS 1. Introduction .........................................................................................................4 1.1. Safety Introduction .........................................................................................5 1.2. Product Specifications................................................................................. ....5 1.3. Applications……….. ......................................................................................5 1.
Wanscam IPCAM User Manual General Introduction IP Camera is a new generation product with the combination of analog camera & IP video technology. Despite all functions which analog cameras have, IP camera can compress and encrypt video and audio signal then send it to remote terminals through internet with its built-in processor and web server.
Wanscam IPCAM User Manual 1. Introduction 1.1 Safety Instructions (1). Use the proper power source. Do not use this product with a power source that supplies more than the specified Voltage(100-240V AC). (2). Never insert anything metallic into the camera. Inserting metal object into the camera can be a source of dangerous electric shock. (3). Do not operate in wet or dusty environment. Avoid places like a damp basement or dusty hallway. (4). Do not attempt to disassemble the camera.
Wanscam IPCAM User Manual *-Maximum support 15 users viewing at the same time, no limit for users if using forwarder Server function; *- Built in Web Server, convenient for users to use standard browse to realize the real time monitoring and setting administration; *-Support WIFI：802．11b/g wireless networking; *-Support remote system update; *-Support DDNS analysis, support LAN & Internet (ADSL,Cable Modem) *-Support variety of network protocol: TCP/IP, UDP, SMTP, PPPoE, Dynamic DNS, DNS Client, SNTP, BOOTP
Wanscam IPCAM User Manual 2. Products Panels and Controls .
Wanscam IPCAM User Manual 2.1. Main Interface Introduction of AJ Series Products *Non-extended line IP Camera Tailgate 1: Audio Out , 2: Audio In 3: Ethernet interface: RJ-45 interface. Power Supply Light: constant on after power up Network light: constant sparkle after power up data transmission. 4: Antenna: 5: Power input interface: connect direct current 5V Power *Extension line interface definition icon: Extension Line Of AJ Series Power: direct current 12V.
Wanscam IPCAM User Manual When installing the camera to the local network for the first time, the camera must be connected to an Ethernet input on your router so that your network can locate your camera. 1. Power on the camera in close proximity to your router. 2. Directly connect your camera to your router using the Ethernet cable. If the yellow and green indicator lights on the camera are blinking, then your camera is successfully communicating with your router. 3.
Wanscam IPCAM User Manual 6. Click “Find” to find the IP Camera on your router. (If you have several items on your router, Check the bottom of the camera for the factory IP setting.) 7. Once you have located the camera on your router, open the command prompt(cmd). 8. From the Command Prompt, type in “ ipconfig” then press Enter. 9. Write down the number that represents the Default Gateway, then go back into the Search Tool. 3.
Wanscam IPCAM User Manual 10. Running the Search Tool software, If network cable and power supply are correctly connected, device type, name and IP address will be shown in the Equipments list (Otherwise, please confirm whether power supply and network cable work normally). In the picture above, the configuration information of the current computer is listed on the left side; and the network configuration information of the selected device is listed on the right side.
Wanscam IPCAM User Manual *** The first time that you connect to your camera either from your local network or from a remote network, you will need to connect using an internet Explorer browser, and you must prompt three necessary ActiveX controls. Please refer to Section 4 for ActiveX configuration. 4. Prompting the necessary ActiveX controls The first time you access your camera online from a new computer(including the LiveDemo), you will need to prompt three necessary ActiveX controls. 1.
Wanscam IPCAM User Manual 4.1 Prompting the necessary ActiveX controls-continued 3. This will usually prompt you or a bar may appear on the top of the page. If prompted, select run or install. Click on the yellow bar to proceed. *If you are using Internet Explorer version 9.0 , this prompt bar will appear on the bottom of your browser instead of at the top of your browser. 5. Logging into your camera from a local internet location 1.
Wanscam IPCAM User Manual 2. A Windows Security pop-up will appear. In this window, Type “admin” as the Username, and Leave the Password field empty. 3. Once the Username and Password are accepted, choose the option to sign in using ActiveX Mode (For IE Browser). 6. Enabling wireless connection using a wireless router 1. While your camera is still connected directly to your router with an Ethernet cable, go to the Wireless Lan Settings section on your camera’s menu. 2.
Wanscam IPCAM User Manual 7. Configuring the remote access 1). Each manufacturer of routers handles Port Forwarding in a different way. For detailed, router specific instructions, please visit www.portforward.com and find the model of your router. Then select ‘Default Guide’ for detailed screenshots and use them to help you through the rest of these instructions. 1. Open Internet Explorer and type in the IP address of your Default Gateway. This opens the configuration page of your router. 2.
Wanscam IPCAM User Manual 2). Port Forwarding For TP-LINK TD-8840 WIFI Router Take the TP-LINK TD-8840 router port mapping setting as example. To set up IP Camera as an example: router inner web IP is 192.168.1.1, IP camera inner web address is 192.168.1.50, and port is 80. 1. First log in router web administration interface. 2.
Wanscam IPCAM User Manual 3. Click “virtual server” in the unfolded menu. 4. fill “80” under the right port start or port end, Server IP address fill "192.168.1.50", protocol select "TCP/UDP"OR”“TCP”, finally don’t forget click under “"save/apply” 1. DLINK ex-factory definition router address is 192.168.0.1 2. Linksys ex-factory definition router address is 192.168.1.1 3. 3com ex-factory definition router address is 192.168.2.1 4. Microsoft ex-factory definition router address is 192.168.2.1 5.
Wanscam IPCAM User Manual For example: If the is a bright , indicating the device is the first way to monitor the status. When you log on the operator interface, you can perform PTZ and video parameters Direction control: Click the arrows in different directions can be the lens to the appropriate direction of rotation Vertical cruise Level cruise 1. Image mirror indicates a reverse image. 2.
Wanscam IPCAM User Manual I rebooted the device :I rebooted the device. Back: Return to monitor mode 8.1.1 Multi-Device Settings z Add a local area network equipment In the multi-device configuration page, you can see all the equipment inside the LAN. The first device is the default device. You can add more devices listed in the list of equipment. Embedded applications, up to 4 devices at the same time-line.
Wanscam IPCAM User Manual 8.1.
Wanscam IPCAM User Manual 8.1.3 Wireless Setting For the details please view “6. Enabling wireless connection using a wireless router”. Page 14th. 8.1.4 ADSL Setting When your device directly connected to the Internet via ADSL, when you need to enter fill in your ISP service providers obtain from the account name and password. Duly completed and click “Settings” button. Your device can connect to the internet has. 8.1.
Wanscam IPCAM User Manual 8.1.6 E-mail and FTP service Settings The above setting is a preparation for the alarm function, the sender should be entered the sender’s email address，recipient 1、2、3、4 is filled with recipient E-mail address；SMTP server should be filled with the sender email SMTP server，e.g. the sender email address is abc@163.com，and enter mail.163.com.
Wanscam IPCAM User Manual The above setting is equally similar to Mail Server Settings，when alarming is triggered it also sends image，please enter FTP server、FTP port、FTP user、FTP password, FTP upload directory、FTP mode，FTP mode has two options: PORT and POSV. If needs a quick upload image, then select it, edit upload image interval （second） 8.1.
Wanscam IPCAM User Manual 8.1.8 Reset/Firm Ware Upgrade This sector is for camera firmware upgrade, it includes device system firmware and device application firmware Be cautious to apply for it! 8.1.9 Restore Factory Settings When users forget password, we can restore ex-factory settings, when click, a picture will pop up, Click ok, and wait for 1 minute and you can use it normally. User setting feature restores 8.1.
Wanscam IPCAM User Manual 9. Warranty Under normal use condition, products resulting from its own failures in the warranty period will be free maintenance. Warranty Terms as following: a) Charge-free maintenance of the product is one year. We can repair it for free during the guarantee period (Damages not caused by misuse or vandalism). Repair over guarantee period, we will charge maintenance fee. b) During guarantee period, breakdown caused by misuse or other reasons out of range of warranty.
