Operation Manual

Wanscam IPCAM User Manual

*** The first time that you connect to your camera either from your local

network or from a remote network, you will need to connect using an

internet Explorer browser, and you must prompt three necessary ActiveX

controls. Please refer to Section 4 for ActiveX configuration.

4. Prompting the necessary ActiveX controls

The first time you access your camera online from a new computer(including the

LiveDemo), you will need to prompt three necessary ActiveX controls.

1. From Internet Explorer click on “Tolls” then select “ Internet Options.” Select the

“Security” tab, and then click the “Custom Level” button.

• If you are using either Windows Vista or Windows 7, please run Internet

Explorer as Administrator.

Now, change the tree following options to “Prompt”:

---Download Signed ActiveX controls

---Download Unsigned ActiveX controls

---Initialize and script ActiveX controls not marked as safe for scripting.

2. After all three ActiveX controls are prompted; please login to you camera’s IP

address. If this is your first time logging into your camera, you will type into an

internet Explorer browser http:// followed by the IP address that you’ve entered

into the IP address field of the network setting section. For example, the address

will look like this: Http://192.168.1.99