Operation Manual

Wanscam IPCAM User Manual

4.1 Prompting the necessary ActiveX controls-continued

3. This will usually prompt you or a bar may appear on the top of the page. If

prompted, select run or install. Click on the yellow bar to proceed.

*If you are using Internet Explorer version 9.0 , this prompt bar will appear on the

bottom of your browser instead of at the top of your browser.

5. Logging into your camera from a local internet location

1. To access your camera from your local connection, you will need to open an

Internet Explorer browser. In the browser, type Http:// followed by the IP address

that you’ve entered into the IP address field of the network setting section. For

Example, The address will look something like this :

Http://192.168.1.99