Operation Manual

Wanscam IPCAM User Manual

For example: If the

is a bright , indicating the device is the first way to monitor the

status.

When you log on the operator interface, you can perform PTZ and video parameters

Direction control: Click the arrows in different directions can be the lens to the

appropriate direction of rotation

Vertical cruise Level cruise

1. Image mirror indicates a reverse image.

2. Resolution, mode, brightness, contrast default setting are：320*240、50HZ、6、4、

mode is mainly for the adjustment of Light strength, please adjust to 60HZ when light is

poor or in dark.

3. There are 3 browse modes in IE mode: visitor, operator, administrator, the authority

of administrator is the highest, log in different authorities, the operation will be

different. Regarding to 3 user authorities, please refer to 3.4.4. Equipment User

Administration.

If you want to see 4-way,or 9-way， you can click the icon

OSD: In the video display date and time. You can disable the OSD function or choose the

color of OSD.

Snapshot Photo: Click the icon

interception photo.

Video: Click

icon to enter the recording mode, the icon becomes ，again, click

the end of the recording.

8.1. Manager Operation

When you logged on as Administrator, click on “Administrator action” to enter setting

interface. Device Information: You can see the device serial number, equipment systems

and device firmware version of the application firmware version of the.

Alias setting : You can set your favorite device aliases.

Date&Time set : seting the date and time.

Uer settings : Can be set up to 8 users. On this page you can set up accounts of the user

name, password, as well as in their packet (administrator, operator, visitor).

z Visitor : In this mode, you can only visit.

z Operator :You can set the direction of the lens device, set the video screen’s

brightness, contrast and other parameter.

z Administrator : You can set the device advanced configuration.

UPnP set :If you want internet access IPCAM, to ensure that the state is successful UPnP.

Device Firmware Upgrade: The system firmware update the device firmware and

application of

Restore factory settings : When there is not a response when the error occurred, you can

restore the factory settings to resolve the device.