Operation Manual

Wanscam IPCAM User Manual
I rebooted the device :I rebooted the device.
Back: Return to monitor mode
8.1.1 Multi-Device Settings
z Add a local area network equipment
In the multi-device configuration page, you can see all the equipment inside the LAN.
The first device is the default device. You can add more devices listed in the list of
equipment. Embedded applications, up to 4 devices at the same time-line. Click the
“second road equipment” and double-click “Current list of devices in the LAN” in the
device entry name, host address, Http port will automatically be filled, require the user to
fill in the correct account name and password, click “Add.” Repeat this process you can
continue to add devices. Finally do not forget to click on the “Settings” button.
z Add a device on the internet
First, make sure you want to add devices to access via IP address or domain name. For
example:http://202.96.133.134: 9008 or
http://IPcam.dyndns.org:9008. And then fill in
host address: 202.96.133.134 HttpPort: 9008 or host address: IPcam.dyndns.org Http
port: 9008. and fill in the correct account name and password to the last click on “Add.”
Repeat the above steps can add other devices
19