Operation Manual

Wanscam User Manual for iPhone

1. Enable WI-FI mode of your iPhone .Go to iPhone App Store, search “e-View” iPhone monitor

application and install it.

2. Add the camera to the App e-View.

1). Run the e-View, you will find “Add Camera”

Please click here to add cameras.

PAGE 1
Wanscam User Manual for iPhone 1. Enable WI-FI mode of your iPhone .Go to iPhone App Store, search “e-View” iPhone monitor application and install it. 2. Add the camera to the App e-View. 1). Run the e-View, you will find “Add Camera” Please click here to add cameras.
PAGE 2
). The methods to add camera to e-View. To find the camera’s P2P ID number, JWEV-XXXXXX-XXXXX Method 1 : Input the CameraID Username Password of your camera manually. Then click “Done” button. Method 2 : Please click “LAN Search”button then you will get a list of the cameras in the same LAN with your iPhone. Choose the camera which you want to view.
PAGE 3
. Finished adding the camera, you will see following picture: 4. Live video and operation interface.
PAGE 4
Pay attention: Audio and talkback function cant be enabled at the same time. By sliding the screen, you can control your camera. 5. Snapshots & Recording, the files can be found here. 6. For App with newer version, please pay close attention to our App Shop. Any suggestions, please let us know, contact us on www.wanscam.com, thanks.