Bluetooth Stereo Headset Kit (BT6 TX-RX) User Manual Version 1.3 PALM GARDEN ENTERPRISES CORP. Copyright © 2005.
Index FCC Information ........................................................................... 1 Bluetooth Introduction................................................................. 2 Package List.................................................................................. 3 Bluetooth Stereo Headset Kit ...................................................... 3 Stereo Headset Features...........................................................................4 TX Features............................
responsible for compliance could void the user’s authority to operate the equipment. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.
Bluetooth Introduction Bluetooth is a global wireless standard for enabling short-range wireless connections. It is a simple and instant radio solution that allows different devices to talk to one another. Bluetooth eliminates the need for cables/wires/cords between devices such as mobile phones and headphones. Bluetooth facilitates fast and secure transmissions of both voice and data between devices even if they are not in line-of-sight. Most Bluetooth devices are described as 'Class 2'.
Package List The following checked items should be in the package. Items Quantity Transmitter (TX) 1 Headset (HS) 1 USB Cable 1 Audio Cable 1 Bluetooth Stereo Headset Kit Thank you for choosing Bluetooth Stereo Headset Kit. It is unique and different from most Bluetooth products in the market for its good integration of AV and Headset Profiles. It is a multifunctional device that provides users with dual capability for listening to music in a wireless mode as well as answering the cell phone.
Stereo Headset Features z z z z z z z Superior audio quality - Delivers 44.1 kHz and 48 kHz, 16 bit stereo music (near CD quality audio). Pick up / drop a phone calls – Pick up / drop phone calls with buttons on the headset. Listen to music and respond to phone calls – Enable switching between music and calls made to your Bluetooth enabled cell phone. Wireless mobility – It is very convenient without being restricted by cables.
Bluetooth Stereo Headset Kit Outline Bluetooth Stereo Headset is shown in figure 1 and figure 2 below with dimensions specified. Functions and dimensions for TX are listed in figure 3. Figure 1 – Stereo headset Status LED Indicator Button 3 Button 2 Button 1 Charging LED Indicator Power On / Off Function Button 1 Charging Port (DC in) Button 2 Button 3 Mode Phone Mode Volume Up Volume Down Accept / Drop Calls Music Mode Volume Up Volume Down No Function PALM GARDEN ENTERPRISES CORP.
Power On / Off Button Charging Port (DC in) Charging LED Indicator Status LED Indicator Audio Jack Figure 3 – Bluetooth TX How to Use Bluetooth Stereo Headset performs well with the Bluetooth TX and can be used to demonstrate the following usage scenarios: z Responding to cell phone Pick up / drop calls made to the headset from Bluetooth enabled cell phones. Unlike the mono headsets, Stereo Headset can transfer ring/voice to both your ears with two channels.
Before You Use Please make sure the battery power of the headset and the TX is sufficient. If the power is low, the charging LED indicator of headset or TX will start to flash. Please charge the headset and the TX when you see the low power signal. When you are charging the battery, TX or headset charging LED indicator will constantly on. When the battery is full, the light of headset or TX will shut off automatically. Responding to Cell Phone 1.
(4) If the pairing information or log were deleted from the phone, the headset must be paired with the phone again. (5) Start to use Stereo Headset to pick up / drop calls in a wireless mode. *Note: 1. Some cell phones require that an explicit connection be established with the headset. For example, Nokia 3650 requires a Bluetooth connection to the headset be initiated and stay connected before proceeding further. Other phones may initiate a Bluetooth connection only when a call is received.
z TX Dongle Function Keys Location Keys TX Dongle Power Key Function Power on / off LED indicators Location TX Dongle LED Status Function Status Flashes Pairing mode LED Flashes slowly Standby / Linked Charging Flashes slowly Low battery output LED Lights up steady Charging (Indicator turns off when charging is completed.) 5.Re-connecting When the headset loses connection to Bluetooth enabled cell phone, you need to repeat step 3 to re-connect it. 6.
2.Connecting TX / Headset (1) Turn on the headset. Meanwhile, you can hear the opening sound from the headset. (2) The TX and the headset will be paired automatically after a few seconds. (3) When the pairing is done, the LED indicator on headset will start flashing. (4) Play music. (5) You can hear music from the headset. *Note: 1. It may take you a few seconds in paring headset with TX for the first time. It will be quicker in searching after that. 2.
Switching Between Music and Phone Calls 1.Setting Up / Prerequisite Please confirm the headset has been added to a list of “Paired Device” in the Bluetooth enabled cell phone. *Note: If you haven’t paired the headset with the Bluetooth enabled cell phone before, you need to refer to the section “Responding to Cell Phone”. 2. Making the Switch (1) Repeat the procedure ”Enjoying the Superior Music Quality”, and play music. (2) Use the cell phone and find the headset on the “Paired Device” list.
Specification Product Name Bluetooth Stereo Headset Photo Standard Bluetooth 1.2 compliant Power Class Class 2 Frequency Band 2.402~2.480 GHZ unlicensed ISM band Profile Supported AV, Headset and Hand Free Profiles Audio Format SBC Memory 8M flash external memory Rx Sensitivity -86 dBm RF Output Power 4 dBm Sampling Rate 44.
Product Name Bluetooth Transmitter Photo Standard Bluetooth 1.2 compliant Power Class Class 2 Frequency Band 2.402~2.480 GHZ unlicensed ISM band Profile Supported AV, Headset and Hand Free Profiles Audio Format SBC Memory 8M flash external memory Rx Sensitivity -86 dBm RF Output Power 4 dBm Sampling Rate 44.
FAQ 1. Q : How do I know that the battery of the headset have insufficient power? A : The battery power is almost exhausted when one or more following scenarios happen: (1) The headset starts to reset automatically. (2) You can constantly hear breaks on the audio link, or (3) You cannot connect the headset to the TX after several tries. 2. Q : Why cannot I create a connection to the headset? A: (1) Verify that the battery power of headset is not running low.