User's Manual

PALM GARDEN ENTERPRISES CORP.

How to Use

WANSTONIC Stereo Headset performs well with the Bluetooth TX and can

be used to demonstrate the following usage scenarios:

z Enjoying the superior music quality

Connect a Bluetooth TX with any audio source with a 3.5ψmm audio jack

and play music. Let the music be streamed to the Stereo Headset. Users

can also use another Bluetooth enabled device that minimally supports

the A2DP profile of the Bluetooth specification, version 1.1 to play music.

In this scenario the ability of the headset to pick up / drop phone calls is

not utilized.

Before You Use

Please make sure the battery power of the headset and the TX is sufficient. If

the power is low, the charging LED indicator of headset or TX will start to

flash.

Please charge the headset and the TX when you see the low power signal.

When you are charging the battery, TX or headset charging LED indicator will

constantly on. When the battery is full, the light of headset or TX will shut off

automatically.

Figure 3 – Bluetooth TX

DC Power I/P

3.5m/m Phone Jack

POWER ON/OFF