User's Manual

PALM GARDEN ENTERPRISES CORP.

1. Setting Up Music Source

(1) Please make sure you have 3.5ψmm audio jack in your music source, i.e

CD Player, a MP3 player or a PC.

(2) Link the TX to the audio source with an audio cable.

(3) Press the Power Key on TX about 5 seconds until the LED indicator is

flashing. Release it and the TX will be turned on.

2.Connecting TX / Headset

(1) Turn on the headset. Meanwhile, you can hear the opening sound from

the headset.

(2) The TX and the headset will be paired automatically after a few seconds.

(3) When the pairing is done, the LED indicator on headset will start flashing.

(4) Play music.

(5) You can hear music from the headset.

*Note:

1. It may take you a few seconds in paring headset with TX for the first time. It

will be quicker in searching after that.

2. During the pairing mode, the status LED indicator on TX will flash quickly.

When the pairing is done, the LED indicator on TX will flash slowly and

steadily.

3.Turning Off

(1) If you don’t want to use the headset, turn off the headset by the power

switch.

(2) Turn off the TX.