H Series——Waterproof IP Camera 2009.10 Version: V2.
H Series IP Camera User Manual - Waterproof Index 1 INTRODUCTION................................................................................................................ 4 2 FUNCTION AND FEATURES ............................................................................................ 4 3 APPEARANCE AND INTERFACE .................................................................................... 5 4 5 3.1 APPEARANCE .......................................................................
H Series IP Camera User Manual - Waterproof 7.3.4 Alarm Time Setting ............................................................................................... 19 7.4 ADVANCE SETTING ..................................................................................................... 19 7.4.1 User Management ................................................................................................ 19 7.4.2 Auto Capture Setting ...................................................................
H Series IP Camera User Manual - Waterproof 1 Introduction The IP Camera combines a high quality digital video camera with network connectivity and a powerful web server to bring clear video to your desktop from anywhere on your local network or over the Internet. Your IP Camera package should contain the following items, If any of the listed items are missing, please contact your reseller from where you purchased the camera for assistance.
H Series IP Camera User Manual - Waterproof 9 Support UPNP, port forwarding automatically on the router. 9 Motion detection to detect environmental situation. 9 Alarming record can be stored by email. It also sends alarm info to the alarm server. 9 Support three level of user authority. 9 Support upgrading online. 9 Manufacture provide a free DDNS url, when IP Camera is connected to the internet, this URL can be used to visit the device.
H Series IP Camera User Manual - Waterproof 3) Audio Input Socket: White socket is designed for connecting external microphone or line-in audio signal. If connect with line-in audio signal, you must choose line-in in Audio input mode area .Please refer to 7.1. 4) Analog signal output Socket: Yellow Connector – Supply BNC Female connector, use to connect analog signal device. 3.3 Instruction This device only have 4 socket which list on 3.
H Series IP Camera User Manual - Waterproof 4.2 Visit Instruction To visit the IP Camera, you should do some settings of IP Camera and Internet besides getting the communication link fluency. 1) The PC and IP Camera are in the same LAN. If you want to use this PC to visit the IP Camera, you need to make sure their IP address is at the same segment. Otherwise you need to do the reset of the IP Camera’s IP address. For example, the IP Camera-1’s IP address in Figure 3 is 192.168.1.139 (at the segment of 192.
H Series IP Camera User Manual - Waterproof Figure 4 If you have the firewall software in your PC, when you run the HSearch_en.exe, it may pop up a window to say if you want to block this program or not, then you should choose not to block. Figure 5 5.
H Series IP Camera User Manual - Waterproof required to install the ActiveX before viewing the video. As Figure 5, click “Download ActiveX (when first use)”. The dialog just as Figure 6 will pop up accordingly. Click “Run”, then it will download and install the ActiveX automatically. Figure 6 After the ActiveX installation, click the “Video View” as Figure 5, then you will enter the video view home page as below Figure 7. Figure 7 5.2.
H Series IP Camera User Manual - Waterproof 5.2.2 Video Displaying Area The video displaying area is correspond to the resolution, the higher the resolution is, larger the displaying area will be. If motion detection was set, when it has detected any movements of the certain area, it will show a pane to call user’s attention. Figure 8 is status column at the bottom of video displaying area. Figure 8 1) Displaying how many users are visiting this video.
H Series IP Camera User Manual - Waterproof 5.2.5 Record Click “Record” button, which could record the video with audio and store it at the present path. When recording, there will be an indicated symbol in the status of video display area to show you it is recording. Click the “Record” button again, and then the record stops. 5.2.6 Playback Click “Playback” button, it will pop up a player which could play the video stored on your PC disk.
H Series IP Camera User Manual - Waterproof and guest. Their initial passwords are respectively “123456”, “user”, “guest”. 2) Refer to the content of part 7.5.1 to set the system time. 6 Visit IP Camera from WAN 6.1 Port forwarding Follow the “Visit IP Camera from LAN” steps; make sure PC-1 can visit IP Camera-1. In Figure 3, before the computers in WAN (PC-2, PC-3) can visit the IP Camera-1, must put the IP Camera -1 into WAN. You can set port forwarding on Router-1 to put IP Camera-1 into WAN.
H Series IP Camera User Manual - Waterproof 6.2 DDNS In Figure 3, Router-1 get WAN IP address via ADSL, these WAN IP address is always changing, so, the IP address can’t be confirmed when visit the device in WAN. We need the dynamic domain name server (DDNS). IP Camera-1 send IP configuration to DDNS every few time, DDNS can recognize the WAN IP address of the router-1 which connected with IP Camera-1. The WAN IP address can be searched on DDNS by domain name.
H Series IP Camera User Manual - Waterproof The third party domain name is realized by analysis manner, the domain name will be displayed in the browser all the time when visit camera. If the port is not 80, the port number should be add to the domain name with colon. Example: http://ipcam.3322.org:81 7 Other Settings 7.1 Video Setting Page 7.1.1 Image Setting Figure 14 Drag the glide bar showed as above Figure 14, user can adjust the brightness, saturation, contrast, hue. 7.1.
H Series IP Camera User Manual - Waterproof takes more bandwidth. 2) Bit Rate Adjustment: User can choose a certain bit rate, generally speaking, the bigger the bit rate is, the more clear the image will be. Please choose the suitable bit rate according to your bandwidth. If you select a big bit rate, while the bandwidth is worse, it will cause the video stream can’t be transferred smoothly, the video quality will be not perfect too.
H Series IP Camera User Manual - Waterproof programs on this equipment, and every program will transfer the data through some port, in fact data is transferred from one port to another. The port setting of this page is asking user choose which port to transfer the data for the web server. 3) WIFI Setting: The wireless setting page is showed as below Figure 17, user can click the “Search” button, it will show you the page telling you the WIFI network it has detected.
H Series IP Camera User Manual - Waterproof Before using UPNP function, please make sure the router’s UPNP function has been triggered. Because there are so many different routers, and not all of them can support UPNP. Please test if the router work well with the equipment, if not, we would suggest you don’t enable this function. Figure 18 7.3 Alarm Setting Page 7.3.1 External Alarm Input Figure 19 below has listed the external alarm input setting.
H Series IP Camera User Manual - Waterproof detection is enabled. Figure 20 7.3.3 Alarm Mode Setting When the alarm is triggered, user can adopt several ways to alarm. ¾ Snapshot a live picture of the site on the SD card. ¾ Record a 30 seconds long video on the SD card (including 5 seconds long video before the alarm was triggered). ¾ Send the recorded video on the SD card to the FTP server (Please enable “save the video on SD card” function and insert the SD card first).
H Series IP Camera User Manual - Waterproof 7.3.4 Alarm Time Setting Figure 22 IP Camera will trigger alarm only on the time set by Figure 22. Please adjust the system time first. Refer to Part 7.5.1 7.4 Advance Setting 7.4.1 User Management There have three level of authority; they are admin/user/guest. Admin have the highest authority, it can do any change to the settings. User account only can operate the IP camera, can’t do changes to the settings, and please refers to Figure 24.
H Series IP Camera User Manual - Waterproof Figure 24 Figure 25 7.4.
H Series IP Camera User Manual - Waterproof 7.4.3 E-mail Setting Figure 27 In Figure 27, the blanks which have been filled with info should be filled. If any info is not filled right, the setting will fail. Before setting these parameters, please refer the settings of Outlook Express. 7.4.4 FTP Setting Figure 28 In order to use FTP function, user should apply username and password on the FTP server first. And please apply some storage, and the authority to write and create sub-category into it.
H Series IP Camera User Manual - Waterproof 7.4.5 Alarm Server Setting Figure 29 Please confirm if you have connected to alarm server. The alarm message format as follow: GET /api/alarm.asp? username=username& userpwd=password& rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port, 3 =Other Type)& io=0 Alarm server need develop by customer; user can extend other functions on this server, like SMS, MMS alarm, and mobile phone etc. 7.4.
H Series IP Camera User Manual - Waterproof 7.5 System Setting Page 7.5.1 Date and Time Setting Figure 31 Please refer to above Figure 31. Select the time zone first. There are three options to set the time and date. One is manually, another is keeping the same as the time and date on the computer, and the third one is getting it from the NTP server. 7.5.
H Series IP Camera User Manual - Waterproof this position. ¾ Click “Factory Default” button, equipment will restart and back to all the default settings. ¾ Click “save”, it will save all the present settings. ¾ “Restore” part, select the setting file you have saved, click OK, it will recover all the settings. ¾ “Upgrade” part, select the firmware file for upgrading, click OK, and you are able to upgrade the equipment. After the upgrading, equipment will restart.
H Series IP Camera User Manual - Waterproof 7.5.4 System Log Checking Figure 34 7.5.5 User browsing Log Checking Figure 35 8 Advanced Application 8.1 Mobile phone Browsing The device can be visited via mobile phone when it is connected to internet. Below are t he visit methods: 1) http://IP:Port/mobile.html or http://IP:Port/wap.wml. The “IP” is the WAN IP address of the IP Camera or domain name (third party domain name only), if HTTP port is 80 , the “port” of 80 can be omitted.
H Series IP Camera User Manual - Waterproof hen visit the device by the first and second methods, the device will send the pictures by MJPED compression format to the mobiles. The size of the pictures will be depended o n the mobile resolution mentioned in 7.1.2. The third method to visit it, the whole operati on will be the same as visiting by PC. 8.2 Other web browser visit device Using browser with IE kernel, user must download the Activex.
H Series IP Camera User Manual - Waterproof 8.3 Centre Management Software Figure 37 HSView_en.exe is a free software offered by factory, several devices on LAN and WAN can be browsed at the same time. The software also support snap, video record and so on. The below Figure 37 is the interface. For more information, pls. refer the <> in CD.
H Series IP Camera User Manual - Waterproof Triggered Actions User Setting Date/ Time Setting Email/ send message to alarm server Three levels support Upgrade Upgrade from network DDNS A free DDNS provided by manufacturer Hardware Ethernet 10Base-T/100base-TX Interface Audio In audio input interface x 1 Weight 1240g Dimension 216mm(L)*90mm(W)*90mm(H) Power DC 12V Physical Power Index consumption Operating temperature Software(PC Side) <12W 0 ~ 45 Humidity 10% ~ 80% non-condensing