Dear users, the configuration for this camera is professional, so please read the user manual carefully before using the camera. 用户手册。 IP Camera (B series) User manual 2012-12 V4.
Statement If the user manual can not help you to solve the problem, please call our technology center about the solutions. We will update the content for the new functions without notice. Notice 1、 Installation Environment Keep away from the places for high-temperature, heat source and direct sunlight; Keep away from water and when get wet, cut off the power immediately. Avoid to use in damp environment, the reference range for operation humidity is below 85%RH.
http://www.wansview.com Index 1 2 3 PRODUCT INTRODUCTION ...................................................................................................... 4 1.1 PRODUCT SUMMARY ................................................................................................................. 4 1.2 PACKAGE FOR TYPICAL PRODUCTION ........................................................................................ 4 INSTALLATION GUIDE .............................................................
http://www.wansview.com 5.4 NCB540W PTZ CAMERA ....................................................................................................... 24 5.5 NCB547W PTZ CAMERA ....................................................................................................... 25 5.6 NCB543W WATERPROOF CAMERA .........................................................................................
http://www.wansview.com 1 Product introduction 1.1 Product summary Thank you for choosing our company‟s B series IP camera, the IP Camera combines a high quality digital video camera with network connectivity and a powerful web server to bring clear video to your desktop from anywhere on your local network or over the Internet. It is very suitable for family, shops, office building and so on. Main features for B series: The video is compressed by MJPEG.
http://www.wansview.com 5V √ √ √ √ 5V √ √ √ √ 5V √ √ √ √ 5V √ √ √ √ 5V √ √ √ √ NCB541W PTZ camera NCB545W PTZ camera NCB540W PTZ camera NCB547W PTZ camera NCB543W Waterproof camera Notice: If you choose IP camera with wireless function, so it includes wifi module inside the camera and antenna in package. Please check carefully if all listed items are included in the package, if anything missing, please contact vendor in time.
http://www.wansview.com 2 Installation guide 2.1 Operation of connecting to LAN Power on the IP camera(please check carefully the voltage of power adaptor, don‟t insert incorrect power, otherwise it will damage the device), connect IP camera to router by network cable, meanwhile, connect computer to the same router, example of figure 1. Figure 1 Insert CD to computer driver, double click “BSearch_en.
http://www.wansview.com 1) Click „Search (F3)‟; 2) Choose a camera; 3) Change the ip address of the ip camera according to the information in the red frame on the left. The numbers in the red circle should not be the same. Http port should be a number between 80~65535; 4) Enter user name and password for the device, the default is “admin” and “123456”; 5) Click „update‟; 6) After updating successfully, click “Search (F3)”, choose the device again and click “Browse (F4)”.
http://www.wansview.
http://www.wansview.com Notice:When the device is connected both WIFI and wired, it will firstly connect to the wired network, if it can‟t be connected, then it will changed to connect to the wifi. The IP address and port is the same, either wireless or wired network. 2.3 Operation of connecting to WAN You should connect the LAN network first and do the port forwarding, connect as figure 6. Figure 6 If visit IP Camera from WAN, you must do port forwarding on the router. Example of figure 7.
http://www.wansview.com Operation Steps: 1) After login the interface of the router,choose “Port Forwarding” 2) Choose “Add custom Service” Input IP camera port. Input IP address of IP camera,click “Apply”。 (the http port and ip address should be 3) 4) the same as figure 2 which set by you own) After finishing the port forwarding, you can use WAN IP address of router and http port of camera to visit the camera by remote computer as figure 6.
http://www.wansview.com Indicates the status for 9 devices: if unconnected, button is gray if connected, button is green If connected wrong, button is yellow If alarm , button is red 3) Multi Channel displaying area If users added multi channel(refer to 3.4.2), when shift to 4-Ch, 9-CH, and it will show other devices automatically. You select one device, and you can operate it by these keys: play, stop, and record, control Pan/tilt, etc.
http://www.wansview.com 3.2 Network Settings 3.2.1 Basic network setting The user can also enter the Basic Network Settings to set the IP address except using the search software. See below Figure 10. Figure 10 Network settings 3.2.2 WIFI setting Please refer to chapter 2.2. 3.2.3 ADSL setting User could enable the ADSL Dialup according to the below Figure 11 (The ADSL provider will assign the user name and password to you when you apply for ADSL service.
http://www.wansview.com enabled. Not all the routers support UPnP perfectly. Please test if the router works well with the equipment, if not, we suggest you to disable this function and do the port-forwarding manually. 3.2.5 DDNS Setting If doing port forwarding successfully, and visit the camera via ip address in WAN, you also can visit it via DDNS.
http://www.wansview.com 3.2.6 MSN setting Figure 15 MSN setting The user can apply MSN account number by himself, fill in account information in figure 15, and add friends to the number, the camera will display in friends list when it is connected, the friend only need to send “url?” to the camera, it will send its link in WAN to the friend, so the friend can use the link to visit the camera. 3.3 Alarm Settings 3.3.
http://www.wansview.com User can select the motion detection. If there is any motion, it will detect the motion and trigger the alarm. In the motion detect sensibility and sound sensitivity, the larger the figure, the more sensitivity. As showed in Figure 16, if any external alarm detector is connected, user will be able to tick “Alarm Input Armed”. If the external alarm detector is an always on switch alarm, please choose “open”.
http://www.wansview.com Figure 17 Schedule interface 3.3.
http://www.wansview.com When it detects alarming, it can send email to your appointed email box, but you need to set email service parameters correctly. Example of figure 18, click “Submit” to save these parameters, and then you can click “Test” to check if the setting is successful.(Notice: Before setting these parameters, please check if they are OK.) When you set email service parameters correctly, can active “enable “Report Internet IP by mail”.
http://www.wansview.com 3.4.2 Multi-Device Setting Figure 21 Multi-device setting As Figure 21, User can add 9 devices the maximum to view the device simultaneously. Click “refresh” button to check the device in the LAN. When click a device, will popup setting dialogue box and input the device info, as figure 22 and click “save” to add device. After that, must click “Submit” button in figure 21 to save device. Figure 22 Add device 3.4.3 Other settings You can choose open or close indicator LED.
http://www.wansview.com Figure 23 Other setting 3.5 Maintain 3.5.1 Device Information Figure 24 Device information 3.5.
http://www.wansview.com 3.5.3 Time Setting If the device is connected to the Internet, you enable the NTP server to correct the time and need to select the correct time zone. Otherwise you should use the PC‟s time to correct its time. Figure 26 Date and time settings 3.5.4 Firmware upgrade Figure 27 Upgrade firmware The camera runs two kinds of firmware, one is system firmware, another is application firmware, can upgrade them respectively. 3.5.
http://www.wansview.com 4 Operation of other software 4.1 Other web browser Except IE browser, you can visit the camera by Firefox, Safari, Chrome, Opera browser etc, please select “Mode 2 to view” when using these browser (example of figure 3). You can use “Mac search and setting tool” in CD to search the camera and set IP address of camera in Mac computer. Because the camera supports bonjour protocol, so you can view the camera in LAN and visit it directly in safari browser, example of figure 29.
http://www.wansview.com 4.3 Centralization Control IPCMonitor is a free software offered by factory, several devices on LAN and WAN can be browsed at the same time. The software also supports snapshot, video record, alarming and so on. The interface is as figure 30. Figure 30 For more information, please refer to the <> in CD. 4.4 Other software You can use the VLC software etc to play video, visit it as the following URL format: http://IP address:port/videostream.
http://www.wansview.com 5 Product family for NCB series 5.1 NCB546W Card camera Figure 31 The camera adopts 300K pixels CMOS sensor, 3.6mm lens, built in MIC, 12 pieces IR LED, audio out port. It uses 5V power adaptor. 5.2 NCB541W PTZ camera Figure 32 The camera adopts 300K pixels CMOS sensor, 3.6mm lens, built in PTZ and MIC, 10 pieces IR LED, audio out port, alarm in/out port. It uses 5V power adaptor.
http://www.wansview.com 5.3 NCB545W PTZ camera Figure 33 The camera adopts 300K pixels CMOS sensor, IR cut, 3.6mm lens, built in PTZ and MIC, 8 pieces IR LED, audio out port, alarm in/out port. It uses 5V power adaptor. 5.4 NCB540W PTZ camera Figure 34 The camera adopts 300K pixels CMOS sensor, IR cut, 3.6mm lens, built in PTZ and MIC, 8 pieces IR LED, audio in/out port, alarm in/out port. It uses 5V power adaptor.
http://www.wansview.com 5.5 NCB547W PTZ camera Figure 35 The camera adopts 300K pixels CMOS sensor, IR cut, 3.6mm lens, wifi module, built in PTZ, speaker and MIC, 10 pieces IR LED, audio out port. It uses 5V power adaptor. The camera have a slide switch, you can put switch to AP on or AP off mode. The RJ45 interface will be disabled when the switch is located AP on, the device is like as wireless router, it can connect with computer and mobile phone directly via wifi, example of figure 36.
http://www.wansview.com 5.6 NCB543W Waterproof camera Figure 37 The camera adopts 300K pixels CMOS sensor, 4mm IR lens, 36pcs IR LED. It uses 5V power adaptor. Statement: 1. This manual may be different with your using camera, if you have any questions of the manual, please contact our technical support. 2. This manual will be updated periodically; the company reserved the right to without prior notice.