PROFESSIONAL POPCORN MAKER War ing POP OFF Pro WPM25 For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
IMPORTANT SAFEGUARDS When using any electrical appliance, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING YOUR POPCORN MACHINE. 2. Do not touch hot surfaces. Always use handles or knobs to operate. 3. To avoid any risk of electrical shock, do not immerse cord or plug into water or other liquid. 4. This appliance should not be used by or near children, or individuals with certain disabilities. 5.
16. Turn ALL switches to OFF position before disconnecting power plug from the wall supply outlet. 17. Not recommended for outdoor use. 18. Do not use appliance for other than intended use. 19. To avoid overheating, always add oil and then kernels before operating. 20. Extreme caution must be used when unloading popcorn. Always place the unit over a countertop so that residual hot oil or water running out will not cause burns. 21. KEEP OUT OF REACH OF CHILDREN. 22.
b) c) If the appliance is of the grounded type, the extension cord should be a grounding 3-wire cord. The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally. Parts 3 War ing POP OFF Pro 1 2 4 6 1. Housing 2. Kettle, Lid and Stirrer 3. Door (removable) 4. Tray (removable) 5. Light (not shown) 6.
Assembling PRocedure Waring Waring POP POP OFF OFF Pro Pro Figure 2 Hook the kettle onto the hanger of the main unit. Figure 1 Place door on hinges. Waring POP OFF Pro Figure 4 Finally, insert the internal kettle plug into the socket on the inner top of the popcorn housing. Figure 3 Insert tray.
POPPING INSTRUCTIONS 1. Follow assembly procedure. 2. Make sure the popcorn maker is unplugged before you do any of the following. 3. Before using the unit, please check carefully to be sure voltage (120V – 60 Hz ) is suitable to your home. 4. Clean the internal surface of the kettle with warm sudsy water, rinse well and dry with a clean cloth. Wipe down inner and outer housing with damp cloth. 5.
12. Remove plug from power supply if the unit is not being used. 13. Repeat steps 8 to 10 for continuous popping. Cleaning and Maintenance It is strongly recommended to clean the kettle frequently to avoid burning excess oil onto the bottom of the inner pot. After using the popcorn machine, let it cool, and use a wet cloth to clean the main unit, main body and door. It is strongly recommended to wash and dry the tray after each use to avoid any bacteria buildup.
Any other trademarks or service marks of third parties herein are the trademarks or service marks of their respective owners. ©2008 Waring Products Division of Conair Corporation 150 Milford Road East Windsor, NJ 08520 www.waringproducts.