Instruction Booklet

6
9. Wash and dry container after each use. See separate
Cleaning & Sanitizing Instructions for All Waring
Blenders.
10. Not for water-jet cleaning.
11. The use of ear protection is recommended during
extended operating periods.
CB15T/ CB15TP OPERATION
1. Before starting, make sure that the blender cord is
unplugged.
2. Position container assembly on
motor base so that it is rmly
seated and not tilting to one side.
Plug blender cord into outlet.
3. Put ingredients into container.
Always add liquid ingredients rst, unless otherwise
specied in recipe. Do not ll above Max line. Place
cover securely on container and fasten the cover
clamps.
4. Press the STANDBY button to turn on the blender.
Press the UP arrow or DOWN arrow. The initial time
will be 10 seconds.
5. Push the UP arrow to set the time required. The timer
will advance only in 10-second intervals. Timer can be
set to the maximum of 3 minutes.
6. Select and press a speed button; the blender will
start and run for that selected time. It will count
down in 1-second intervals and stop at 0. NOTE: If
you want to increase or decrease time while timer is
counting down, press UP or DOWN arrows. Timer will
increase or decrease in 10-second intervals. After 5
seconds, the timer will turn off and return to manual
mode.