User guide

To Wash and Rinse Container:

1. REMOVE CONTAINER FROM MOTOR BASE. Remove

lid. Rinse container interior and lid under running water.

Add washing solution to container. Scrub and ush out

the container interior and lid to dislodge and remove as

much food residue as possible. Empty container.

2. Wipe down exterior of container with a soft cloth or

sponge dampened with washing solution.

Wash lid and lid insert in fresh washing solution. Fill

container ¼ full with fresh washing solution, cover,

place on motor base, and run on high speed for two (2)

minutes. Empty container.

3. Repeat step (2) using clean rinse water in place of

washing solution.

To Wash and Rinse Spigot:

NOTE: Spigot is to be handwashed only.

4. Remove spigot assembly from jar adaptor by rotating

counterclockwise. Separate the lever from the rubber

insert by pushing the ball tip out of the loop. Remove the

rubber insert.

5. Wash spigot assembly and rubber insert in fresh

washing solution.

6. Repeat step (5) using clean rinse water in place of the

washing solution. Be sure all debris has been removed.

NOTE – IMPORTANT

IN ORDER TO MINIMIZE POSSIBILITY OF SCALDING,

TEMPERATURE OF WASHING SOLUTION AND RINSE

WATER MUST NOT EXCEED 115° F (46° C), AND

QUANTITY USED MUST NOT EXCEED ¼

CONTAINERFUL