User guide
8
6. Allow motor to come to a complete stop before
removing container. Never place the container on the
motor base or remove it from the motor base while
the motor is running.
7. Press the STANDBY
button again to turn off the
blender.
8. Remove the container from the motor base and
empty the contents.
9. Wash and dry container after each use, according to
Cleaning and Sanitizing Instructions, page 13.
10. Not for waterjet cleaning.
11. The use of ear protection is recommended during
extended operating periods.
Spigot Instructions
When pouring jar contents through the spigot, simply
push the lever toward the blender jar. If contents are
too thick, it can be difcult to pour through the spigot.
Running the blender on LOW while pouring can help
the ow. Make sure to always have the lid positioned on
the blender with the clamps locked when running the
blender.
CB15T/CB15SF OPERATION
1. Before starting, make sure that the blender cord is
unplugged.
2. Position container assembly
on motor base so that it is
rmly seated and not tilting
to one side. Plug blender cord
into outlet.