Product guide

58
2 DRIVELINE
Also available as an accessory.
power take-offs
There is a wide range of clutch-independent
and clutch-dependent power take-offs to
drive all sorts of body equipment.
clutch-independent power take-offs
pter-din
Rear-mounted engine power take-off for
direct drive of a hydraulic pump.
pter1400
Rear-mounted engine power take-off with
flange connection for hydraulic pump.
pter 100
Rear-mounted engine power take-off with
flange connection for hydraulic pump.
clutch-dependent power take-offs
ptr-f
Connecting flange attachment and low-rev or
high-rev.
ptr-fl/fh
Connecting flange attachment and low-rev or
high-rev.
ptr-d/ptr-dm/ptr-dh
Low/medium/high-rev with DIN-connection
for direct attachment of a hydraulic pump.
ptrd-f
High-rev with connecting flange attachment
for direct-fitted propshaft.
ptrd-d
High-rev with dual drive. DIN connection front
and rear for direct attachment of hydraulic
pumps.
ptrd-d1
High-rev with dual drive. Connecting flange
attachment at the rear and DIN attachment
at the front.
ptrd-d2
High-rev with dual drive rear and single drive
front. Two connecting flange attachments rear
and one DIN attachment at the front.
rear aXles
Type Axle Gear Max torque (Nm)
Max axle/bogie
load (tonnes)
GCW
approval (
tonnes)
Single reduction
RSS1344C/D
Solo Hypoid 2600 13 44
RSS1356
Solo Hypoid 2400/2800 13 56/44
RSS1360
Solo Hypoid 3550 13 60
RTS2370A
Tandem Hypoid 3550 23 70
Hub reduction
RSH1370F
Solo Conical spiral cut 3550 13 70
RTH2610F
Tandem Conical spiral cut 3550 26 100
RTH3210F
Tandem Conical spiral cut 3550 32 100
RTH3312
Tandem Conical spiral cut 3550 33 120
rear aXle ratios
RSS1344C/D RSS1356 RSS1360 RTS2370A RSH1370F RTH2610F RTH3210F RTH3312
2.31:1* 2.50:1 2.47:1 2.43:1 3.46:1 3.33:1 3.33:1 3.61:1
2.47:1* 2.64:1 2.64:1 2.57:1 3.61:1 3.46:1 3.46:1 3.76:1
2.64:1 2.79:1 2.85:1 2.83:1 3.76:1 3.61:1 3.61:1 4.12:1
2.85:1 3.10:1 3.08:1 3.09:1 4.12:1 3.76:1 3.76:1 4.55:1
3.08:1 3.44:1 3.40:1 3.40:1 4.55:1 3.97:1 3.97:1 5.41:1
3.36:1 3.67:1 3.67:1 3.78:1 5.41:1 4.12:1 4.12:1 7.21:1
3.70:1 4 .11:1 4.13:1 4.55:1 4.55:1
4.50:1 5.41:1 5.41:1
5.14:1 7.21:1
5.67:1
6.17:1
* For RSS1344D.