Pro Blender User Manual

14. When blending hot liquids, remove center piece

of two-piece cover. Begin processing with only one

cup (8 oz.). Always begin processing at the lowest

speed setting. Keep hands and other exposed skin

away from the lid opening to prevent possible burns.

See Hot Blending instructions, next page.

15. Screw on container bottom firmly. Injury can result if

moving blades accidentally become exposed.

16. Do not leave blender unattended while it is running.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS

For your protection, Waring Blenders are equipped

with a 3-conductor cordset that has a molded 3-prong

grounding-type plug, and should be used in combination

with a properly connected grounding-type outlet as shown

in Figure A. If a grounding-type outlet is not available, an

adapter, shown in Figure B, may be obtained so that a

2-slot wall outlet can be used with a 3-prong plug.

Referring to Figure C, the adapter must be grounded by

attaching its grounding lug under the screw of the outlet

cover plate. CAUTION: Before using an adapter, it must

be determined that the outlet cover plate screw is properly

grounded. If in doubt, consult a licensed electrician. Never

use an adapter unless you are sure it is properly grounded.

Note: Use of an adapter is not permitted in Canada.