Pro Blender User Manual

5. CAUTION: To avoid damage to your blender, do not run

the blender if the blades become blocked or jammed

during use. Turn the blender off immediately, remove

the container from the blender base and dislodge the

material that is blocking or jamming the blade.

HOW TO ASSEMBLE CONTAINERS WITH

REMOVABLE BLADES

1. Before starting, make sure that the blender cord is

unplugged and that the switch is in the off position.

2. Refer to Figure 1. The following

points are important to note when

putting together the container

assembly:

3. Container gasket must be

between the blade assembly

and the container.

4. Container collar must not be

misthreaded onto the container.

5. Container collar must be securely

tightened onto the container

before placing food or liquid in

the container.

6. Tighten the container collar by holding the container

upside down and turning the container collar

counterclockwise.

7. Place container assembly on unit base so that it is

firmly seated and not tilted to one side. Never place the

container collar or the blade assembly on the unit base

unless the container has been completely assembled

and securely tightened.

Collar

To Tighten

Fig.1