Pro Blender User Manual

HOW TO DISASSEMBLE & CLEAN

CONTAINERS WITH REMOVABLE BLADES

1. Be sure the switch is in the off position.

2. Remove the container assembly from the unit base and

empty the contents.

3. To disassemble the Waring Blender container assembly,

turn container collar clockwise.

4. The glass container, container collar and blade

assembly are dishwasher safe. The plastic container,

lid, measuring cup lid insert and gasket must be

washed by hand. Allow all parts to air dry, and

reassemble for next use.

5. When assembling container after cleaning, be certain

all components are in the proper position.

6. It is particularly important to place the container gasket

between the blade assembly and the container.

7. Wash and rinse container prior to initial use, and

immediately after each use.

HOW TO CLEAN CONTAINERS WITH

NONREMOVABLE BLADES

1. Remove the container from the unit base. Remove the

lid. Add a cup of cleaning solution, made by adding a

few drops of dishwashing detergent to 1 cup of cool

water, to the container. Scrub and flush out the interior

of the container and the lid to dislodge and remove as

much residue as possible. Empty the container.

2. Add more cleaning solution. Put lid on container, place

container on unit base, and run on high speed for

two minutes.