Instruction Booklet

8
on the motor base or remove it from the motor base while
motor is running.
8. Always hold container with one hand when starting and
while blending. Never operate without lid.
9. Wash and dry the container after each use. See Cleaning
and Sanitizing Instructions.
10. Unplug to turn off all power to blender.
TBB175 – Variable Speed Controls
Follow steps 1–3 in the TBB145
operating instructions.
4. This blender is equipped with
a Variable Speed Control Dial
that operates from speeds 1–10
and POWER, START/STOP and
PULSE buttons. Always use
Speed 10 or PULSE for crushing
ice.
5. For continuous blending, turn the variable speed control
dial clockwise to set the speed from 1–10. Press the START/
STOP button to start blending. The LED will blink during
blending. When blending is complete, press the START/
STOP button to stop blending. You may wish to start at a
low speed and increase to a higher setting.
6. For momentary operation, press the PULSE button; motor
will run on MAX speed until the button is released.
NOTE: This blender utilizes a Slow Start
™
feature. When
beginning HI or LO operation, the unit will start in a lower speed
for 1 second and then switch to the full selected speed. PULSE
utilizes a .5-second Slow Start
™
. This allows for a more even
blending of ingredients in container.
7. Allow motor to come to a complete stop before removing
container from blender base. Never place the container
on the motor base or remove it from the motor base while
motor is running.
8. Always hold container with one hand when starting and
while blending. Never operate without lid.