Instruction Booklet
4
The 3-speed button on the front of the Waring
®
Commercial Drink
Mixer regulates the operating speed. Choose either LO (I), MED
(II), or HI (III) speed. For mixing heavy drinks, use HI (III) speed
only; for light drinks with more liquid, use LO (I) speed.
The drink mixer can be operated without engaging the ON/OFF
cup actuator by using the PULSE button. The PULSE button
will operate at whatever speed the 3-speed button is set to. The
PULSE button will operate only while depressed. Keep a firm
grip on the cup while using PULSE .
Your Waring
®
Commercial Drink Mixer is supplied with 2 agitators,
1 standard and 1 “buttery” (with the movable aps), per spindle.
To change agitators, simply hold the spindle shaft with one hand
and turn the agitator in a clockwise direction. This will loosen
the screw, and you can unscrew to remove. Insert replacement
agitator and screw bottom screw back in. Use only a standard
metal mixing cup with the standard agitator.
TIMER INSTRUCTIONS
Your Waring
®
Commercial Drink Mixer
timer can be programmed manually or set
while the unit is in use.
KEY USES/DEFINITIONS
1. Plus Button + :
a. Used for scrolling up to set time. If holding down, time
will advance by 10 seconds for every 1 second pressed.
Every press will advance time 1 second.
b. Used for turning timer On/Off. Press Plus Button
fast 3 times to turn timer OFF and display “---”;
pressing Plus Button or Minus Button again will
turn timer back on.
2. Minus Button - :
a. Used for scrolling down to set time. If holding down, time
will decrease by 10 seconds for every 1 second pressed.
Every press will decrease time 1 second.
b. Used for setting the countdown timer, holding the Minus
Button down for more than 3 seconds puts the timer into
the Set mode: S0:00.