Instruction Booklet

3. Speed Button:

Every press will increase the speed from Lo to Hi. This is

circular, so 3 presses gets you back to Lo.

4. Pulse Button:

Press and hold Pulse Button and the mixer runs

at the set speed until button is released.

TIMER RANGE

1. Timer range 0:01 to 9:59

NOTE: To deactivate timer, tap 3 times rapidly. To activate

the timer, tap or once. Timer will read (R0:00). If you have

a unit with more than one timer, the timers will need to be set

individually.

1. Manual Timer Programming

– Ensure timer is activated and in the ON position (R0:00).

– Press and hold the button for 3 seconds to enter the

SET mode (display will blink during SET mode), S0:00.

– Use and buttons to scroll until you reach desired time.

– Wait 5 to 6 seconds and time will be set.

– To reset time, press and hold and buttons

simultaneously for 3 seconds.

2. Assisted Timer Programming

– Ensure timer is activated and in the ON position (R0:00).

– Mount the cup and actuate. Timer will begin to count up.

– When your mix has reached its desired consistency,

remove the cup.

– Press and hold the button for 3 seconds to set the time

OR replace the cup within 10 seconds to continue the

count.

NOTE: If cup is removed during countdown or count-up, the timer

will pause and blink for 10 seconds. Replace the cup within the 10

seconds to continue, or timer will return to set time.