Installation Instructions
CKT
Cable Strapping
Concrete Kit Tape
Application
Instructions
Suitable Applications
This product is solely intended
for the purpose of bonding
the plastic floor strapping
that is included with each
EasyHeat Warm Tiles Cable kit
to smooth concrete floors or
cement-board surfaces. This
tape is not suitable for wood
sub-floors.
When applied to the recom-
mended floor surfaces, and
in accordance with these
instructions, this product
will normally eliminate the
need to drill and tap screws
into concrete surfaces for
the purpose of securing the
strapping to the floor.
Directions for Use
1. For maximum bond strength,
thoroughly clean the surface
with a damp cloth and allow
to dry.
2. Ensure that the surface is
free of wood chips, sawdust,
powder, loose dirt and all
other particulate. The tape
will not properly adhere to a
dirty or dusty surface.
3. Mark the location of each
section of strapping directly
on the floor. Follow the Warm
CKT
Cable Strapping
Concrete Kit Tape
25 feet
CKT
Cable Strapping
Concrete Kit Tape
Tiles Installation Instructions
for strapping placement.
4. Peel back approximately six
inches of the tape and affix
to one end of the strapping
placement line, marked on
the floor.
5. Carefully unroll the tape along
the marked line and press into
place by hand.
6. When ready to install the
plastic strapping, carefully peel
back the top paper backing,
exposing the adhesive bonding
material.
7. Press one end of the plastic
strapping firmly into the
adhesive and carefully begin
uncoiling the strapping while
continuously pressing into
the adhesive. Ensure that the
strapping and adhesive remain
aligned.
8. Use a blunt object, such as
the handle of a screwdriver,
to press the strapping into
the adhesive along the entire
length.
9. Cable can now be installed
in accordance with the
Warm Tiles Cable Installation
Instructions.
Storage
This product should be stored
at room temperature con-
ditions of 72
o
F (22
o
C) and
50 % relative humidity, and
should remain enclosed in the
packaging until the time of use.
14079-001 Rev. 1
©2005 Easy Heat Printed in USA
CKT
Cable Strapping
Concrete Kit Tape
Made in
Canada