Installation Guide

ManualsBrandsWarmlyYours ManualsBath24 in. x 32 in. Oval Mirror Defogger

Attach Mirror Defogger to the back of the Mirror

Step 5

Place the element on the mirror so that it will line up with the

markings on the wall.

Step 6

Dry t the Mirror Defogger on the mirror, and line up the lead wires

with electrical box. Do not remove paper backing yet. Draw an

outline of the Mirror Defogger on the mirror.

Step 7

Peel back 2” of backing from the Mirror Defogger and line it up with

outline drawn in Step 6. Adhere backing to the top of the Mirror

Defogger and slowly remove the rest of the backing, sticking the

Mirror Defogger to the back of the mirror as you progress, to smooth

out any air bubbles that may appear. Refer to Diagram D.

Note: If gluing mirror to wall, apply adhesive to the mirror backing,

not covered with the Mirror Defogger.

Electrical Wiring

Step 8

With the assistance of another person, position the mirror so the

leads can be connected to the Romex cable as referred to in Step

4. Refer to Diagram E for specic wiring instructions.

Mirror

Wall

ClearlyYou™ Defogger

Existing

electrical box

for vanity

lighting

New single

gang electrical

box

QuickTime™ and a

TIFF (Uncompressed) decompressor

are needed to see this picture.

Mirror defogger

Remove Protective

Paper

Power Cord

Back of Mirror

Mirror Defogger

leads from Mirror Defogger

to light junction box

Model # Shape Width (Inches) Length (Inches) Watts Volts Amps MSRP

FFM-1218 Rectangle 12 18 29 120 0.24 $65.00

FFM-1824 Rectangle 18 24 57 120 0.48 $85.00

FFM-2432 Rectangle 24 32 96 120 0.80 $105.00

FFM-15R Round 15 20 120 0.17 $65.00

FFM-20R Round 20 41 120 0.34 $85.00

FFM-25R Round 25 65 120 0.54 $105.00

FFM-1826OV Oval 18 26 45 120 0.38 $85.00

FFM-2432OV Oval 24 32 76 120 0.63 $105.00

Circle

Diagram D

Electrical Wiring Step 8 - continued

Step 9

Push the excess wire into the junction box.

Step 10

Wire the Romex cable to the junction box that houses the electrical

wiring for the existing lighting.

Install Mirror

Step 11

Install mirror in line with the mirror manufacturer’s instructions.

OPERATION

By wiring the Mirror Defogger to the lighting above the vanity, the

Mirror Defogger will automatically turn on whenever you turn on

your vanity lighting. The Mirror Defogger will begin to defog within

5 minutes of operation.

SPECIFICATIONS