ET-END-KIT End Seal Kit Installation Instructions (part #JSR12) Free Design Service • 24/7 Installation Support • (800) 875-5285 • www.WarmlyYours.
ET-END-KIT ET-END-KIT Installation Instructions NT C A B Item Description Quantity A Heat-Shrink Tube (5 in. long x ¾ in. dia.) 1 B Woven Braid Sleeving (4 in. long x ½ in. dia.) 1 C Heat-Shrink Cap (½ in. dia) 1 WARNING: ELECTRIC SHOCK HAZARD: Disconnect all power before installing or servicing heating cable and accessories. A qualified person must perform installation and service of heating cable and accessories.
ET-END-KIT Installation Instructions ET-END-KIT END SEAL KIT INSTALLATION INSTRUCTIONS 1. Score the outer jacket 2 in. from the end of the cable. Remove the jacket to expose the braid. CAUTION: When removing the outer jacket, be careful not to damage the braid or the base cable insulation. 7. Apply heat evenly to the heat shrink tube until it shrinks around the cable. 4. Pull the pushed-back braid over the sealed end cap and twist the braid end together. 8.
