Instructions

SHOWER BASE,
PAN OR PACK
BOND COAT
(LATEX MODIFIED THINSET MORTAR)
PRODESO/TEMPZONE™ CABLE
ZERO R-VALUE MEMBRANE
BOND COAT
(LATEX MODIFIED THINSET MORTAR) *
CERAMIC TILE
RECOMMENDED HEIGHT
1” (25mm)
BOND COAT (LATEX
MODIFIED THINSET MORTAR)
CERAZORB (OPTIONAL)
* - UNLESS UN-MODIFIED THINSET MORTAR IS SPECIFIED BY MEMBRANE MANUFACTURER.
INSTALLATION INSTRUCTIONS
Typical Cross Section of Floor Heat in a Shower
2017
Figure 6
Drain
CROSS SECTION OF THE LAYERS
Pan or Pack
pitched at 1/4” per
foot
Cerazorb (optional)
Prodeso / TempZone™ Cable
Membrane
Tile
1”
1/4” per foot slope
Installation Support • No Nonsense™ Warranty • [phone] • www.WarmlyYours.com