Installation Guide

Installation and Operation
SECTION 5
9
5.1 Recommended Equipment and Items for Installation
The following equipment and items are recommended for installation of the WarmlyYours TempZone™
Floor Heating Cable :
•Ohmmeter(ormultimeter)
•CircuitCheck™
•Hotgluegun(ifusinghotgluetosecuretheCableFixingStrips)
•Industrial-gradehotglue(ifusinghotgluetosecuretheCableFixingStrips)
•Chiselorroutertocreateagrooveforthespliceinthesuboor
• Hammer
•Screwdriver
•Protectivewallplate
• Duct tape or high temperature tape
•Staples,nails,adhesiveor1⁄2inchscrewstoattachtheCableFixingStripstothesuboor
•Class-AGroundFaultCircuitInterrupter(ifnotusingaWarmlyYoursthermostat)
•Double-gangelectricalboxwithasingle-gangmudring/deviceplateforeachthermostatorpowermodule
•Listedelectricalconduit(tobeprovidedbyinstaller)
•Permanentmarker
•Tapemeasure
•Utilityscissors
Hot glue gun
SmartPlan™
Tape
Tape measure
Ohmmeter
Electrical box
Circuit Check™
Screwdriver
Utility knife
Marker
Scissors
Hammer