Instructions / Assembly

Floor Heating Cable Cross Section
with Prodeso Heat Membrane
Wood Subfloor
Cement-based Subfloor
Cement-based Subfloor with CeraZorb
TempZone
Heating Cable
TempZone
Heating Cable
Gypsum-based underlayment
TempZone
Heating Cable
TempZone
Heating Cable
Existing, structurally sound
vinyl floor *
*CONSIDERATIONS CONCERNING INSTALLATION OVER
EXISTING VINYL FLOORING:
- Vinyl flooring needs to be secured over the entire surface.
- Single vinyl floors ONLY (Multiple layers of vinyl flooring need
to be removed)
- If foam or cushioned vinyl has been previously installed, the
vinyl flooring needs to be removed entirely and the
PRODESO HEAT MEMBRANE needs to be fixed directly to
the subfloor.
- Vinyl flooring needs to be clean of debris, dust, oil, grease,
and wax substances.
- Outside-perimeter-secured vinyl flooring is NOT acceptable
for direct installation of PRODESO HEAT MEMBRANE as it
may cause undesired stress to the tile assembly.
Modified (ANSI A118.11) or
unmodified (ANSI 118.1) thinset
Modified (ANSI A118.11) or
unmodified (ANSI 118.1)
thinset
Modified (ANSI A118.11)
or unmodified (ANSI
118.1) thinset
Modified (ANSI A118.11) or
unmodified (ANSI 118.1)
thinset
Fast Setting Latex
Modified thinset
(ANSI A118.4 - A118.15)
Unmodified Thinset
Mortar (ANSI A118.1)
Gypsum
underlayment
Modified (ANSI A118.11) or
unmodified (ANSI 118.1)
thinset