Installation Manual for your TempZone™ Custom Mat Electric Radiant Floor Heating System Free Design Service • 24/7 Installation Support • No Nonsense™ Warranty • (800) 875-5285 • www.WarmlyYours.
INSTALLATION INSTRUCTIONS FOR WARMLYYOURS CUSTOM MATS WARNING READ ALL OF THE INSTRUCTIONS BEFORE BEGINNING INSTALLATION. FAILURE TO OBSERVE THE WARNINGS COULD RESULT IN DEATH OR INJURY FROM ELECTRICAL SHOCK OR FIRE. MAT FAILURE, IMPROPER OPERATION OR FLOOR DAMAGE MAY ALSO BE A RESULT. A MAT WARRANTY IS PROVIDED (PER NOTED TERMS) BASED ON THE INSTALLATION BEING DONE IN ACCORDANCE WITH THESE INSTRUCTIONS. IMPROPER INSTALLATION MAY VOID WARRANTY.
Planning Ahead To reduce the potential for tile cracking ensure the subfloor structure is built strongly enough to accommodate the tile (slate, granite, etc.) and tiling method selected. Your local tile retailer may be able to help with such information. The Tile Terrazzo Marble Association of Canada or the Tile Council of America have published standards available which provide detail on recommended methods of flooring construction.
Dry Fit Completely roll out the mat(s) on the floor to ensure it fits the floor space. DO NOT cut or modify the WarmlyYours mat to fit the area, if there is a problem with fit contact WarmlyYours. The cables are on the bottom of the mat and are embedded against the subfloor, the tile is set on top of the fabric. Each mat has 2 cold leads which must be run to an electrical connection box.
Electrical Tests Check the resistance of the mat. The resistance for 120V mats is measured between the black and white conductors; the resistance for 240V mats is measured between the red and black conductors. The resistance value measured should be +/- 10% of the resistance value noted on the rating label. Test insulation integrity by connecting a resistance meter across the black lead and the ground braid.
Installing the Floor Covering 1) TILE Before starting, read the tile flooring manufacturer’s installation instruction, review any specific instructions they may have with regard to the use of their product with electric radiant heating. After the mat is secured in the first layer of mortar apply the tile on top of the mat in the normal manner. The thickness of the thinset layer must be in accordance with the tile and thinset manufacturer’s recommendations.
2) Waterproofing Membrane Use WarmlyYours mats in conjunction with membranes that, as a minimum, meet American National Standard for Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile and Dimension Stone Installations (ANSI A118.10) and are suitable for the intended application. Before starting, read the waterproofing membrane manufacturer’s installation instructions and the tile flooring manufacturer’s installation instructions.
3) Floating Laminate or Engineered Wood Floors Before starting, read the laminate or engineered flooring manufacturer’s installation instructions, review any specific instructions they may have with regard to the use of their product with electric radiant heating. After the mat is secured in the first layer of mortar, cover with at least ¼” of thinset or self leveling compound. Ensure the thinset or self leveling compound is smooth and level as an uneven finish may result in a poor floor fit.
4) Glue Down Laminate or Engineered Wood Floors Before starting, read the laminate or engineered flooring manufacturer’s installation instructions, and the adhesive manufacturer’s installation instructions. Review any specific instructions either may have with regard to the use of their product with electric radiant heating. After the mat is secured in the first layer of mortar cover with at least ¼” of thinset or self leveling compound.
Thermostat Connection Consult the thermostat manufacturer’s instructions for proper wiring detail. IMPORTANT WarmlyYours requires all electrical connections be made by qualified personnel and in accordance with the Local Electrical Codes or National Electrical Code (NEC) and all applicable local ordinances. Each cold lead is covered with a grounding braid. Ensure that the cold lead braids are directly connected to electrical ground – DO NOT CUT THE GROUND BRAIDS.
Warranty Information Please complete and return the Warranty Card (online or you may send/fax this form) Thank you for purchasing your new WarmlyYours TempZone™ floor warming system. To register your system, go online to www.WarmlyYours.com/warranty, or simply complete, detach and mail the Warranty Card within 30 days of date of purchase to: WarmlyYours, 2 Corporate Dr., Suite 100, Long Grove, IL 60047. For your convenience, you may also fax this card to (800) 408-1100. 1. HOMEOWNER INFORMATION 4.