Product Brochure

Easy Mat
Heating wire attached to an open
cell type fiberglass mesh
Heating Element
Color
Blue
Heating Element
Insulation
Fluoropolymer
Heating Cable
Outer Insulation
Fluoropolymer
Heating Output
15 watts per sq. ft.
Certifications
UL listed for wet locations like
shower floors and benches
Warranty
25-year No Nonsense™ Warranty
Heating Element
Thickness
Variable, nominal 1/8”
Cold Lead
Information
• Length: 15’
• 17 AWG for mats of
9 amps or less
• ⁄” Conduit
2 Cold Leads Max
• ⁄” Conduit - 3 Cold Leads
Install per local code requirements
Factory Splice
Max Size
.4”, ⁄”, 10.3mm
TempZone Easy Mats have no polarity.
WarmlyYours controls are equipped with ground
fault circuit interrupter (G.F.C.I.) protection.
Voltage
Available in 120V
Cold Lead
Construction
Style number AWM2095, 2 core
wires, screened with ground
Cold Lead
Wire Colors
120V: Yellow & black with black
outer sheath
WarmlyYours
Installs under:
Product Information
Example Project
Dimensions
Bathroom
Heated Area
3’ x 6’ 3’ x 8’ 3’ x 10’
Product Cost
$234.00 USD
$292.50 CAD
$276.00 USD
$345.00 CAD
$300.00 USD
$375.00 CAD
Hourly Cost*
1¢/hr USD
2¢/hr CAD
2¢/hr USD
2¢/hr CAD
2¢/hr USD
3¢/hr CAD
* Based on national average of 12¢ per kWh (USA) and 14¢ per kWh (Canada)
Electrical
TempZone™ Easy Mats allow for radiant heating of smaller, simpler areas at an
aordable cost. Install radiant heating mats in front of your kitchen appliances
and bath fixtures for a warm path of under floor heat where you stand the most.
We call this type of application “spot-heating” and it’s a very aordable option
for incorporating floor heating into a smaller room like a bathroom. Utilizing the TempZone™ technology, Easy Mats are available in 120 volt
systems. These under floor mats are perfect for providing targeted heating for moderately sized bathroom and kitchen floors or just the high
trac cooking areas of larger kitchens.
TempZone
™
Easy Mats
Engineered Wood &
Laminate
LVTStone
Tile