Installation Guide

Installation Support • No Nonsense™ Warranty •(800) 875-5285 • www.WarmlyYours.com

TOOLS REQUIRED

INSTALLATION INSTRUCTIONS

- Review instructions carefully before installation

- Installation should be completed by a qualified person

- Please dispose of packaging in a resposible manner

After installation is complete, connect the electric power and turn on the

Power Switch. The unit will begin to heat. If the unit will not be used for an

extended time, simply turn the unit off using the power switch.

2 PCS

1. Do not hook the unit up to a circuit until completely reading

these instructions.

2. This product is intended only for domestic use. Do not put the

unit into water. Do not use in a sauna, shower cubicle or steam

room. This product is for indoor use only.

3. If the heating wire inside the unit fails or becomes damaged, turn

the unit OFF and contact WarmlyYours. Do NOT attempt to repair

or remove the power switch or heating wire.

4. If you encounter any difﬁculties while installing your Towel

Warmer, installation support is available by phone, 24/7 at

(800) 875-5285.

5. If a return is necessary, please use original packaging if possible.

BARCELONA INSTALLATION MANUAL

PAGE 1
BARCELONA INSTALLATION MANUAL TOOLS REQUIRED After installation is complete, connect the electric power and turn on the Power Switch. The unit will begin to heat. If the unit will not be used for an extended time, simply turn the unit off using the power switch. 1. Do not hook the unit up to a circuit until completely reading these instructions.
PAGE 2
BARCELONA INSTALLATION MANUAL SAFETY INFORMATION CLEANING INFORMATION • Towel Warmers are designed to warm towels only and should not be used for any other purpose. • Never stand, sit on or hang on the Towel Warmer unit. • Never allow children to play on or with the Towel Warmer. • Make sure that the unit is unplugged before servicing your Towel Warmer. • The Towel Warmer must be properly grounded.