Instructions / Assembly

11
MOUNT CENTER OFJUNCTION BOX
21 5/8” (550mm) TO THE RIGHT OF CENTER OF STUD
PERMANENT 120V ac
FROM HOUSE POWER
21 5/8”
(550mm)
16” (406mm)
21”
(532mm)
4 7/8”
(124mm)
1/2” (13mm) CONDUIT
2” x 4”
(51mm x 102mm)
ELECTRICAL BOX
FOR OPTIONAL CONTROL
2” x 4”
(51mm x 102mm)
ELECTRICAL BOX FOR TOWEL
WARMER CONNECTION
2” X 4” STUD
(51mm x 102mm)
2” X 4” STUD
(51mm x 102mm)
Appendix A1: Rough-In Diagram - Riviera
Note: Dimensions shown are distances between the center of anchor
points. This example shows 16” on center construction. Your situation
may vary depending on your stud spacing.
WARNING: Locations of electrical box and anchor points may vary.
Measure all dimensions prior to rough-in and installation.
Note: Electrical box must be securely attached to a stud.
Note: Anchor points must be attached to a stud.