Installation Guide

Bracket Assembly Instructions - Riviera
Step 1
Measure for position of brackets using the template if desired. At
least two brackets must attach to a stud.
Step 2
Ax part A to the wall using screw f and drywall anchor e* where
necessary.**
Repeat Step 2 for the three remaining brackets.
Step 3
Screw part B into the positions on the Towel Warmer.
Repeat Step 3 for the three remaining brackets.
Step 4
Hang Towel Warmer on the brackets by inserting part B into part
A, loosening the hex-head screws c with the hex-key d where
necessary.
* Drywall Anchor need not be used when screwing into stud.
** Actual drywall anchor may dier in appearance.
6
Peel plastic lm o of electrical plate.