Instructions / Assembly

Thank you for choosing your nely crafted WarmlyYours Towel Warmer.
Now you can add luxury and comfort to your bathroom with the soothing
embrace of a warm towel or bathrobe upon stepping from the shower.
The radiant heat from the Towel Warmer warms your towel.
Included in this document are all necessary installation and operation
instructions. For model number, reference the location of the product label
as shown in Diagram A on page 7. If you encounter any diculties while
installing your system, installation support is available by phone between
the hours of 8:00am - 5:30pm CST, Monday through Friday by calling
(800) 875-5285.
SAFETY INFORMATION
Towel Warmers are designed to warm towels and bathrobes only and
should not be used for any other purpose.
Never stand, sit on or hang on the Towel Warmer unit.
Never allow children to play on or with the Towel Warmer.
Make sure that the electrical circuit breaker is shut o at the main panel
before wiring or servicing your Towel Warmer.
The Towel Warmer must be properly grounded.
All wiring must be in accordance with the National Electrical Code and
should be performed by a licensed professional who is certied to do
electrical wiring.
Never place your Towel Warmer inside a shower, sauna or steam room.
Never attempt to warm more than 2 towels on the Towel Warmer at
a time. Overloading the Towel Warmer will cause the unit to become
extremely hot and may result in a burn if touched.
CLEANING INFORMATION
Clean the Towel Warmer with a soft, non-abrasive, damp cloth while
warm. Once the Towel Warmer has cooled, lightly polish with a soft dry
cloth. Do not use abrasive cleaning powders, metal polish or chlorine-
based cleaners on any part of the Towel Warmer.
INSTALLATION
This appliance must be installed in accordance with the instructions in the
manual and the NEC guidelines relating to electrical xtures in bathrooms.
The Towel Warmer must be on a GFCI protected circuit and be wired by
a professional who is certied to do electrical wiring.
1