Installation Guide

Bracket Assembly Instructions (continued)

Plug-In Model Only

Plug the cord into a properly grounded outlet. Do NOT use an extension cord to make the

connection between the towel warmer plug and outlet.

Step 1

Hold the towel warmer in place while tightening the hex-head screws D at the base of each

section of tubing A using the smaller Allen wrench L provided to secure the towel warmer in

place.

Step 2

Make sure the unit is turned on using the ON/OFF switch located at the bottom rail on the

left side (when facing the towel warmer). A light will illuminate the switch when the switch is

turned to the “ON” position. Refer to Diagram D for switch location.

Diagram D

Switch