User manual

PAGE 24

9.2 Manual Operation

During Scheduled Operation, you can use the arrow buttons on the home screen to

override the programed target temperature/setpoint for Scheduled Operation and to

set the required temperature manually.

Use the “Arrow Up” or “Arrow Down” button to select the required temperature.

The “Return to Schedule” button will then appear on the home screen – you

should tap this button if you want to end Manual Operation and return to Scheduled

Operation.

You can also choose “Adjust…”.

1. Day and time.

2. Measured temperature.

3. Heating indicator. If visible, the underﬂoor heating system is currently active.

4. Tap her to access the menu.

5. Current target temperature/setpoint.

6. Tap here to increase the temperature.

7. Tap here to decrease the temperature.

8. Current thermostat operating mode.

9. Information on the next thermostat behavior change.

10. Tap here to adjust the length of time the displayed target temperature/setpoint is

to remain valid.

11. Tap here to return to Scheduled Operation. Available only when the thermostat is

operated manually.

2 3

8 9

Note: The temperature set

manually on the home screen

is a temporary setting. The

manual override setting will be

automatically canceled at the

beginning of the next event in

the Scheduled Operation.

Contents