User manual

PAGE 27
© 2014 OJ Electronics A/S
The “for a few days...” option lets you determine the length of time the displayed
target temperature/setpoint should remain valid. The settings define when the
thermostat is to start using the chosen target temperature/setpoint and when it is to
revert to Scheduled Operation. The period of time starts at midnight and includes the
start date. The period of time ends at midnight and the end date is NOT included the
manual override period.
1. On the home screen, adjust the temperature to the preferred level using the
“Arrow Up” and “Arrow Down” buttons.
2. Tap the “Adjust…” button.
3. Then tap the “for a few days...” button.
4. Tap the “Arrow” buttons for any parameter that you want to change for the start
date.
5. Confirm your choice with “Arrow Right” or discard it with “X”.
6. If confirmed, the end date must be set by tapping the “Arrow” buttons for any
parameter that you want to change.
7. Confirm your choice with “√” or discard it with “Arrow Left”.
The thermostat will automatically return to the home screen.
8. If “for a few days...” is enabled for a period of time in the future, a clock is
displayed on the home screen.
The “for a few days...” option can be disabled by tapping “Return to Schedule”
on the home screen or rescheduled by repeating steps 1 to 7.
9.2.1.2 Adjust... for a few days
Contents
<
>
2
1
3
4
5
6
7
8
1
2