User manual

PAGE 56

10.4.7 Floor Protection 1/2

This option ensures that the ﬂoor temperatures are kept within range.

There are four dierent settings:

• Tile–themaximumoortemperatureissetto104°F/40°C

• Laminate–themaximumoortemperatureitsetto82°F/28°C

• Disabled–theoorisnotprotectedagainstexcessiveheating

• Custom–youcandenetheminimumandmaximumtemperaturesthattheoor

is permitted to reach.

The maximum temperature limit protects wooden ﬂoors from excessive heat.

The minimum temperature limit prevents the ﬂoor from becoming uncomfortably

cold when heating is not needed, e.g. in a bathroom with tiles.

The minimum temperature limit can also be used as frost protection.

Note that the minimum temperature function will increase energy consumption.

Although it is still possible to set the target temperature/setpoint to a value higher

than the ﬂoor protection limit, the ﬂoor temperature will be prevented from reaching

a temperature higher than that deﬁned here if the system has been installed

according to the Quick Guide.

1. Tap the “Menu” button on the home screen.

2. Then tap the “Installer Settings” button to access the various installer settings.

3. Tap the “Arrow Right” button to access the second page of Installer Settings.

Contents