Specification

™
The world’s
best-selling electric floor heating brand
WARMUP INC.
USA: [e-mail]
Tel.: [phone]
www.warmup.com
CANADA: [e-mail]
Tel.: [phone]
www.warmup.ca
™
The world’s best-selling electric floor heating brand
FLOOR HEATING SYSTEM ON PRE-ASSEMBLED MATS
SUBMITTAL SHEET WSC-0720
PRODUCT CODES
NADWM-XXX-XXX // NADWM-voltage-wattage
PRODUCT DESCRIPTION
The NADWM oor heating mats are comprised of a low-prole twin conductor cable applied to a sturdy berglass mesh. The mats are
self-adhesive on both sides and allow freedom of design and speed of installation thanks to the pre-spaced format of the heating cable.
ADVANTAGES
• The NADWM mats have been specically designed to provide Primary Heating under a variety of oors. The cable has been pre-
assembled onto the mat to allow for an easy ’tape-down’ installation. At 132°F peak cable temperature, the NADWM system heats up
fast and has been tested and proven to provide 70°F ambient temperature at 4ft in height in 1 hour.
• The NADWM mats come with double-sided tape on both sides for a exible installation over all suboors. Warmup’s StickyMAT range
also provides for a pressure-sensitive adhesive on the mesh to ensure a very low installation prole.
• Using the 4iE® Programmable Thermostat, the product can be programmed to suit the user’s needs. The 4iE® monitors the systems’
power usage and will optimize comfort and consumption costs. The 4iE® controller combines the efciency of built in oor and room
sensors.
• The cable on the NADWM mats is insulated with ETFE advanced uoropolymers both on the conductors and the outer jacket for
maximum protection. The system is fully grounded with a 10ft lead cable for connection to power.
LIMITATIONS
• Do not cut the cable or apply the cable with staples. Apply caution to avoid nailing through the cable and avoid installation under
permanent xtures.
• The NADWM mat is designed for primary heating provided the suboor is properly insulated. Refer to Warmup’s Warmup Insulation
Boards (WIB) to provide additional insulation over uninsulated slabs on grade.
SPECIFICATIONS
Operating voltage 120V, 208V & 240V; 50/60Hz
Width 20” (500mm)
Mat thickness 1/8” (3mm)
Inner / Outer Insulation Advanced uoropolymer (ETFE)
Output rating 14W/sq ft
Coil tail length
10ft (3m)
Approvals cULus